This is the latest recevied telemetry packets stored in our database for station/object EL-R6FLM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758179576 | 0 | 0 | 0 | 0 | 0 |
| 1758178976 | 0 | 0 | 0 | 0 | 0 |
| 1758178376 | 0 | 0 | 0 | 0 | 0 |
| 1758177776 | 10 | 0 | 1 | 0 | 0 |
| 1758177176 | 178 | 474 | 5 | 6 | 0 |
| 1758176576 | 20 | 261 | 2 | 27 | 0 |
| 1758175976 | 0 | 138 | 0 | 12 | 0 |
| 1758175376 | 0 | 0 | 0 | 0 | 0 |
| 1758174776 | 0 | 0 | 0 | 0 | 0 |
| 1758174176 | 0 | 0 | 0 | 0 | 0 |
| 1758173576 | 0 | 0 | 0 | 0 | 0 |
| 1758172976 | 0 | 0 | 0 | 0 | 0 |
| 1758172376 | 0 | 0 | 0 | 0 | 0 |
| 1758171776 | 0 | 14 | 0 | 2 | 0 |
| 1758171176 | 0 | 103 | 0 | 7 | 0 |
| 1758170576 | 1 | 0 | 1 | 0 | 0 |
| 1758169976 | 0 | 0 | 0 | 0 | 0 |
| 1758169376 | 7 | 0 | 1 | 0 | 0 |
| 1758168777 | 0 | 2 | 0 | 1 | 0 |
| 1758168176 | 18 | 33 | 2 | 3 | 0 |
| 1758167576 | 0 | 4 | 0 | 2 | 0 |
| 1758166976 | 0 | 0 | 0 | 0 | 0 |
| 1758166376 | 0 | 0 | 0 | 0 | 0 |
| 1758165777 | 0 | 1 | 0 | 1 | 0 |
| 1758165176 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)