APRS Track Direct

My position About ☰

reset

W0WRC-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0WRC-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1790649502	51 Pkts	50 Pkts	13 Pkts	36 C
1790647702	48 Pkts	43 Pkts	18 Pkts	37 C
1790645902	29 Pkts	26 Pkts	10 Pkts	37 C
1790644102	63 Pkts	60 Pkts	12 Pkts	37 C
1790642302	35 Pkts	34 Pkts	8 Pkts	37 C
1790640502	38 Pkts	37 Pkts	16 Pkts	37 C
1790638702	30 Pkts	30 Pkts	10 Pkts	36 C
1790636902	25 Pkts	22 Pkts	6 Pkts	36 C
1790635102	28 Pkts	27 Pkts	7 Pkts	36 C
1790633302	50 Pkts	48 Pkts	9 Pkts	36 C
1790631502	42 Pkts	41 Pkts	9 Pkts	36 C
1790629702	37 Pkts	34 Pkts	6 Pkts	36 C
1790627902	25 Pkts	24 Pkts	3 Pkts	36 C
1790626102	29 Pkts	27 Pkts	3 Pkts	36 C
1790624302	28 Pkts	26 Pkts	5 Pkts	36 C
1790622502	22 Pkts	21 Pkts	7 Pkts	36 C
1790620702	23 Pkts	21 Pkts	6 Pkts	36 C
1790618902	33 Pkts	32 Pkts	13 Pkts	36 C
1790617102	24 Pkts	23 Pkts	2 Pkts	36 C
1790615302	30 Pkts	30 Pkts	4 Pkts	35 C
1790613502	24 Pkts	24 Pkts	5 Pkts	35 C
1790611702	43 Pkts	40 Pkts	13 Pkts	36 C
1790609902	26 Pkts	25 Pkts	7 Pkts	36 C
1790608102	59 Pkts	57 Pkts	13 Pkts	36 C
1790606302	45 Pkts	42 Pkts	12 Pkts	36 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

InetiGate: 0, 1, 0

Temp: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)