This is the latest recevied telemetry packets stored in our database for station/object VA5EVR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | SolarPower* | BatteryVoltage* | LineVoltage* | InverterWatts* | InverterState* |
---|---|---|---|---|---|
1754405412 | 0 W | 0 V | 116 V | 798 W | 1 |
1754404812 | 0 W | 0 V | 115 V | 897 W | 1 |
1754404213 | 0 W | 0 V | 117 V | 897 W | 1 |
1754403612 | 0 W | 0 V | 117 V | 936 W | 1 |
1754403012 | 0 W | 0 V | 118 V | 642 W | 1 |
1754402412 | 0 W | 0 V | 117 V | 624 W | 1 |
1754401812 | 0 W | 0 V | 117 V | 720 W | 1 |
1754401212 | 0 W | 0 V | 118 V | 741 W | 1 |
1754400612 | 0 W | 0 V | 118 V | 291 W | 1 |
1754400012 | 0 W | 0 V | 118 V | 174 W | 1 |
1754399412 | 0 W | 0 V | 119 V | 156 W | 1 |
1754398813 | 0 W | 0 V | 118 V | 291 W | 1 |
1754398212 | 0 W | 0 V | 118 V | 408 W | 1 |
1754397613 | 0 W | 0 V | 118 V | 390 W | 1 |
1754397012 | 0 W | 0 V | 118 V | 468 W | 1 |
1754396412 | 0 W | 0 V | 118 V | 312 W | 1 |
1754395813 | 0 W | 0 V | 118 V | 291 W | 1 |
1754395213 | 0 W | 0 V | 118 V | 273 W | 1 |
1754394612 | 0 W | 0 V | 119 V | 252 W | 1 |
1754394012 | 0 W | 0 V | 118 V | 351 W | 1 |
1754393417 | 0 W | 0 V | 118 V | 156 W | 1 |
1754392812 | 0 W | 0 V | 118 V | 174 W | 1 |
1754392212 | 0 W | 0 V | 118 V | 312 W | 1 |
1754391613 | 0 W | 0 V | 118 V | 312 W | 1 |
1754391011 | 0 W | 0 V | 118 V | 291 W | 1 |
*Used Equation Coefficients:
SolarPower: 0, 1, 0
BatteryVoltage: 0, 1, 0
LineVoltage: 0, 1, 0
InverterWatts: 0, 1, 0
InverterState: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)