This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU-Used* | CPU-Temp* | MEM-Used* | UpSpeed* | DownSpeed* |
|---|---|---|---|---|---|
| 1754041804 | 9.95 % | 45 C | 28 % | 5.94 KBps | 14.75 KBps |
| 1754040902 | 22 % | 43 C | 28 % | 0.59 KBps | 0.8 KBps |
| 1754040004 | 2 % | 45 C | 28 % | 0.43 KBps | 0.73 KBps |
| 1754039102 | 21.89 % | 43 C | 28 % | 5.4 KBps | 9.18 KBps |
| 1754038205 | 16.83 % | 46 C | 28 % | 3.08 KBps | 3.57 KBps |
| 1754037302 | 22 % | 43 C | 28 % | 4.59 KBps | 10.42 KBps |
| 1754036404 | 23 % | 43 C | 28 % | 0.44 KBps | 1.02 KBps |
| 1754035504 | 2.99 % | 43 C | 28 % | 0.87 KBps | 1.11 KBps |
| 1754034602 | 9.5 % | 46 C | 28 % | 30.38 KBps | 30.85 KBps |
| 1754033705 | 0 % | 45 C | 28 % | 6.63 KBps | 1.4 KBps |
| 1754032802 | 24.26 % | 43 C | 28 % | 1.78 KBps | 1.71 KBps |
| 1754031904 | 16 % | 45 C | 28 % | 13.66 KBps | 98.93 KBps |
| 1754031004 | 18.09 % | 43 C | 28 % | 17.15 KBps | 12.69 KBps |
| 1754030102 | 1.01 % | 43 C | 28 % | 0.92 KBps | 0.62 KBps |
| 1754029204 | 2.49 % | 42 C | 28 % | 0.36 KBps | 0.48 KBps |
| 1754028304 | 19.7 % | 45 C | 28 % | 3.76 KBps | 2 KBps |
*Used Equation Coefficients:
CPU-Used: 0, 1, 0
CPU-Temp: 0, 1, 0
MEM-Used: 0, 1, 0
UpSpeed: 0, 1, 0
DownSpeed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)