This is the latest recevied telemetry packets stored in our database for station/object KE9CPD-FM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU Temp* | CPU Load* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790656806 | 50 Deg.C | 5 % | 0 | 0 | 0 |
| 1790656202 | 52 Deg.C | 5 % | 0 | 0 | 0 |
| 1790655606 | 51 Deg.C | 5 % | 0 | 0 | 0 |
| 1790655002 | 52 Deg.C | 6 % | 0 | 0 | 0 |
| 1790654406 | 54 Deg.C | 6 % | 0 | 0 | 0 |
| 1790653802 | 52 Deg.C | 5 % | 0 | 0 | 0 |
| 1790653202 | 53 Deg.C | 5 % | 0 | 0 | 0 |
| 1790652607 | 53 Deg.C | 5 % | 0 | 0 | 0 |
| 1790652001 | 53 Deg.C | 5 % | 0 | 0 | 0 |
| 1790651406 | 52 Deg.C | 4 % | 0 | 0 | 0 |
| 1790650802 | 51 Deg.C | 5 % | 0 | 0 | 0 |
| 1790650206 | 52 Deg.C | 6 % | 0 | 0 | 0 |
| 1790649601 | 50 Deg.C | 3 % | 0 | 0 | 0 |
| 1790649006 | 51 Deg.C | 3 % | 0 | 0 | 0 |
| 1790648401 | 51 Deg.C | 3 % | 0 | 0 | 0 |
| 1790647802 | 51 Deg.C | 3 % | 0 | 0 | 0 |
| 1790647206 | 50 Deg.C | 3 % | 0 | 0 | 0 |
| 1790646602 | 50 Deg.C | 3 % | 0 | 0 | 0 |
| 1790646006 | 50 Deg.C | 3 % | 0 | 0 | 0 |
| 1790645401 | 51 Deg.C | 3 % | 0 | 0 | 0 |
| 1790644807 | 51 Deg.C | 3 % | 0 | 0 | 0 |
| 1790644202 | 50 Deg.C | 3 % | 0 | 0 | 0 |
| 1790643614 | 51 Deg.C | 3 % | 0 | 0 | 0 |
| 1790643006 | 51 Deg.C | 3 % | 0 | 0 | 0 |
| 1790642402 | 50 Deg.C | 3 % | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU Temp: 0, 0.1, 0
CPU Load: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)