This is the latest recevied telemetry packets stored in our database for station/object K3UV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RFIn* | RFiGate* | DigiRpt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774127091 | 89 Pkts | 86 Pkts | 21 Pkts | 0 | 0 |
| 1774123491 | 125 Pkts | 122 Pkts | 33 Pkts | 0 | 0 |
| 1774119891 | 109 Pkts | 106 Pkts | 39 Pkts | 0 | 0 |
| 1774116292 | 124 Pkts | 124 Pkts | 26 Pkts | 0 | 0 |
| 1774112692 | 80 Pkts | 78 Pkts | 26 Pkts | 0 | 0 |
| 1774109092 | 112 Pkts | 111 Pkts | 20 Pkts | 0 | 0 |
| 1774105491 | 98 Pkts | 96 Pkts | 20 Pkts | 0 | 0 |
| 1774101891 | 106 Pkts | 105 Pkts | 24 Pkts | 0 | 0 |
| 1774098291 | 97 Pkts | 96 Pkts | 29 Pkts | 0 | 0 |
| 1774094692 | 83 Pkts | 83 Pkts | 22 Pkts | 0 | 0 |
| 1774091092 | 101 Pkts | 100 Pkts | 23 Pkts | 0 | 0 |
| 1774087492 | 93 Pkts | 91 Pkts | 28 Pkts | 0 | 0 |
| 1774083891 | 93 Pkts | 93 Pkts | 25 Pkts | 0 | 0 |
| 1774080291 | 78 Pkts | 78 Pkts | 27 Pkts | 0 | 0 |
| 1774076691 | 68 Pkts | 66 Pkts | 22 Pkts | 0 | 0 |
| 1774073091 | 79 Pkts | 78 Pkts | 23 Pkts | 0 | 0 |
| 1774069491 | 75 Pkts | 75 Pkts | 27 Pkts | 0 | 0 |
| 1774065891 | 95 Pkts | 94 Pkts | 28 Pkts | 0 | 0 |
| 1774062291 | 127 Pkts | 124 Pkts | 22 Pkts | 0 | 0 |
| 1774058691 | 116 Pkts | 115 Pkts | 22 Pkts | 0 | 0 |
| 1774055091 | 95 Pkts | 93 Pkts | 19 Pkts | 0 | 0 |
| 1774051491 | 90 Pkts | 89 Pkts | 20 Pkts | 0 | 0 |
| 1774047891 | 61 Pkts | 61 Pkts | 24 Pkts | 0 | 0 |
| 1774044291 | 59 Pkts | 58 Pkts | 20 Pkts | 0 | 0 |
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)