APRS Track Direct

My position About ☰

reset

W7WGC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W7WGC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1766322989	154 Pkts	143 Pkts	124 Pkts	7 C
1766319389	146 Pkts	137 Pkts	112 Pkts	7 C
1766315789	125 Pkts	113 Pkts	91 Pkts	7 C
1766312189	127 Pkts	119 Pkts	98 Pkts	7 C
1766308588	131 Pkts	121 Pkts	99 Pkts	8 C
1766304988	151 Pkts	142 Pkts	120 Pkts	9 C
1766301390	141 Pkts	131 Pkts	108 Pkts	9 C
1766297789	160 Pkts	150 Pkts	130 Pkts	9 C
1766294189	147 Pkts	139 Pkts	120 Pkts	10 C
1766290589	163 Pkts	152 Pkts	130 Pkts	10 C
1766286989	195 Pkts	183 Pkts	160 Pkts	11 C
1766283389	243 Pkts	229 Pkts	209 Pkts	12 C
1766279788	223 Pkts	216 Pkts	186 Pkts	14 C
1766276189	134 Pkts	124 Pkts	102 Pkts	14 C
1766272589	174 Pkts	164 Pkts	142 Pkts	16 C
1766268989	129 Pkts	124 Pkts	97 Pkts	16 C
1766265389	109 Pkts	103 Pkts	81 Pkts	16 C
1766261789	127 Pkts	119 Pkts	89 Pkts	13 C
1766258189	124 Pkts	114 Pkts	93 Pkts	12 C
1766254589	123 Pkts	114 Pkts	91 Pkts	11 C
1766250989	135 Pkts	124 Pkts	102 Pkts	10 C
1766247389	126 Pkts	117 Pkts	96 Pkts	9 C
1766243789	128 Pkts	119 Pkts	100 Pkts	6 C
1766240189	133 Pkts	123 Pkts	101 Pkts	6 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)