APRS Track Direct

My position About ☰

reset

VE3XFD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3XFD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1836274559	14.18 Volt	20 Pkt	16 Pcnt	2 Pkt
1836274410	14.18 Volt	60 Pkt	35 Pcnt	42 Pkt
1836274259	14.18 Volt	20 Pkt	16 Pcnt	6 Pkt
1836274109	14.18 Volt	30 Pkt	19 Pcnt	8 Pkt
1836273959	14.18 Volt	20 Pkt	18 Pcnt	7 Pkt
1774125762	14.18 Volt	110 Pkt	53 Pcnt	10 Pkt
1774124862	14.18 Volt	140 Pkt	56 Pcnt	30 Pkt
1774123962	14.18 Volt	140 Pkt	57 Pcnt	23 Pkt
1774123063	14.18 Volt	120 Pkt	58 Pcnt	24 Pkt
1774122163	14.18 Volt	90 Pkt	49 Pcnt	30 Pkt
1774121263	14.18 Volt	80 Pkt	47 Pcnt	10 Pkt
1774120363	14.18 Volt	80 Pkt	44 Pcnt	7 Pkt
1774119463	14.18 Volt	110 Pkt	44 Pcnt	1 Pkt
1774118563	14.18 Volt	110 Pkt	47 Pcnt	38 Pkt
1774117663	14.18 Volt	110 Pkt	49 Pcnt	10 Pkt
1774116763	14.18 Volt	90 Pkt	48 Pcnt	21 Pkt
1774115863	14.18 Volt	60 Pkt	46 Pcnt	4 Pkt
1774114963	14.18 Volt	50 Pkt	51 Pcnt	40 Pkt
1774114063	14.18 Volt	0 Pkt	20 Pcnt	0 Pkt
1774113163	14.18 Volt	10 Pkt	95 Pcnt	1 Pkt
1774112263	14.18 Volt	20 Pkt	100 Pcnt	0 Pkt
1774111363	14.18 Volt	30 Pkt	100 Pcnt	1 Pkt
1774110463	14.18 Volt	40 Pkt	100 Pcnt	5 Pkt
1774109563	14.18 Volt	40 Pkt	100 Pcnt	5 Pkt
1774108663	14.18 Volt	30 Pkt	100 Pcnt	6 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)