This is the latest recevied telemetry packets stored in our database for station/object F5ZEE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PA Temp* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786722844 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786722545 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786722244 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786721944 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786721644 | 39.76 deg.C | 0 | 0 | 0 | 0 |
| 1786721345 | 39.76 deg.C | 0 | 0 | 0 | 0 |
| 1786721044 | 39.76 deg.C | 0 | 0 | 0 | 0 |
| 1786720744 | 39.76 deg.C | 0 | 0 | 0 | 0 |
| 1786720444 | 39.76 deg.C | 0 | 0 | 0 | 0 |
| 1786720143 | 39.76 deg.C | 0 | 0 | 0 | 0 |
| 1786719844 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786719544 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786719245 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786718943 | 39.6 deg.C | 0 | 0 | 0 | 0 |
| 1786718644 | 39.44 deg.C | 0 | 0 | 0 | 0 |
| 1786718343 | 39.44 deg.C | 0 | 0 | 0 | 0 |
| 1786718045 | 39.44 deg.C | 0 | 0 | 0 | 0 |
| 1786717744 | 39.44 deg.C | 0 | 0 | 0 | 0 |
| 1786717444 | 39.28 deg.C | 0 | 0 | 0 | 0 |
| 1786717145 | 39.12 deg.C | 0 | 0 | 0 | 0 |
| 1786716843 | 39.12 deg.C | 0 | 0 | 0 | 0 |
| 1786716544 | 39.12 deg.C | 0 | 0 | 0 | 0 |
| 1786716244 | 38.96 deg.C | 0 | 0 | 0 | 0 |
| 1786715944 | 38.96 deg.C | 0 | 0 | 0 | 0 |
| 1786715643 | 38.8 deg.C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
PA Temp: 0, 0.16016, -40
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)