APRS Track Direct

My position About ☰

reset

VK2RZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1836274790	0.83 Load	57 DegC	9468 Mb	622 Pkt	893 Pkt
1836274190	0.99 Load	55 DegC	9448 Mb	624 Pkt	619 Pkt
1766282816	0.94 Load	60 DegC	5263 Mb	1391 Pkt	1482 Pkt
1766282216	0.97 Load	56 DegC	5276 Mb	998 Pkt	1157 Pkt
1766281616	0.93 Load	56 DegC	5268 Mb	1021 Pkt	1338 Pkt
1766281017	0.94 Load	57 DegC	5247 Mb	1047 Pkt	1556 Pkt
1766280417	0.97 Load	55 DegC	5266 Mb	915 Pkt	1156 Pkt
1766279816	0.9 Load	56 DegC	5275 Mb	984 Pkt	1234 Pkt
1766279217	1.07 Load	61 DegC	5275 Mb	1435 Pkt	1621 Pkt
1766278616	0.91 Load	54 DegC	5284 Mb	1042 Pkt	1239 Pkt
1766278016	0.8 Load	54 DegC	5280 Mb	1125 Pkt	1492 Pkt
1766277416	0.81 Load	57 DegC	5285 Mb	1062 Pkt	1499 Pkt
1766276817	0.91 Load	55 DegC	5277 Mb	1375 Pkt	1916 Pkt
1766276217	0.87 Load	56 DegC	5278 Mb	1020 Pkt	1319 Pkt
1766275617	0.96 Load	56 DegC	5289 Mb	1207 Pkt	1563 Pkt
1766275017	1.03 Load	58 DegC	5275 Mb	898 Pkt	1017 Pkt
1766274416	0.89 Load	57 DegC	5284 Mb	948 Pkt	1219 Pkt
1766273816	0.98 Load	57 DegC	5275 Mb	1192 Pkt	1746 Pkt
1766273217	0.92 Load	60 DegC	5297 Mb	990 Pkt	1314 Pkt
1766272617	0.95 Load	57 DegC	5280 Mb	1014 Pkt	1330 Pkt
1766272017	0.93 Load	60 DegC	5281 Mb	1419 Pkt	1519 Pkt
1766271417	0.89 Load	57 DegC	5291 Mb	918 Pkt	1055 Pkt
1766270817	1.02 Load	57 DegC	5284 Mb	923 Pkt	1044 Pkt
1766270217	0.85 Load	56 DegC	5282 Mb	1181 Pkt	1556 Pkt
1766269616	0.94 Load	58 DegC	5290 Mb	976 Pkt	1303 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)