APRS Track Direct

My position About ☰

reset

TA1CPR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1CPR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1770126910	1 Pkt	1 Pkt	-41 dBm	0.06 V
1770126286	1 Pkt	2 Pkt	-39 dBm	0.06 V
1770125660	3 Pkt	2 Pkt	-40 dBm	0.06 V
1770125035	2 Pkt	1 Pkt	-40 dBm	0.06 V
1770124411	4 Pkt	2 Pkt	-44 dBm	0.06 V
1770123785	1 Pkt	2 Pkt	-37 dBm	0.06 V
1770123159	1 Pkt	2 Pkt	-41 dBm	0.06 V
1770122534	1 Pkt	2 Pkt	-39 dBm	0.06 V
1770121908	2 Pkt	2 Pkt	-39 dBm	0.06 V
1770121284	2 Pkt	3 Pkt	-38 dBm	0.06 V
1770120657	0 Pkt	2 Pkt	-37 dBm	0.06 V
1770120032	1 Pkt	1 Pkt	-40 dBm	0.06 V
1770119408	2 Pkt	2 Pkt	-42 dBm	0.06 V
1770118782	3 Pkt	3 Pkt	-45 dBm	0.06 V
1770118155	1 Pkt	2 Pkt	-38 dBm	0.06 V
1770117529	5 Pkt	3 Pkt	-39 dBm	0.06 V
1770116902	4 Pkt	2 Pkt	-39 dBm	0.06 V
1770116277	1 Pkt	2 Pkt	-40 dBm	0.06 V
1770115652	0 Pkt	2 Pkt	-40 dBm	0.06 V
1770115027	8 Pkt	2 Pkt	-36 dBm	0.06 V
1770114401	4 Pkt	2 Pkt	-37 dBm	0.06 V
1770113776	3 Pkt	2 Pkt	-39 dBm	0.06 V
1770113150	2 Pkt	2 Pkt	-38 dBm	0.06 V
1770112524	3 Pkt	2 Pkt	-38 dBm	0.06 V
1770111898	3 Pkt	0 Pkt	-43 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)