APRS Track Direct

My position About ☰

reset

VK2LJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2LJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790692680	13.88 Volt	250 Pkt	50 Pkt	93 Pcnt
1790692560	13.88 Volt	240 Pkt	50 Pkt	93 Pcnt
1790691960	13.95 Volt	250 Pkt	50 Pkt	93 Pcnt
1790691240	13.88 Volt	250 Pkt	50 Pkt	91 Pcnt
1790690520	13.95 Volt	280 Pkt	50 Pkt	91 Pcnt
1790689800	13.88 Volt	280 Pkt	50 Pkt	91 Pcnt
1790689080	13.88 Volt	330 Pkt	50 Pkt	91 Pcnt
1790688841	13.88 Volt	330 Pkt	50 Pkt	91 Pcnt
1790688360	13.88 Volt	360 Pkt	50 Pkt	91 Pcnt
1790687640	13.95 Volt	370 Pkt	50 Pkt	93 Pcnt
1790686920	13.95 Volt	350 Pkt	50 Pkt	93 Pcnt
1790686200	13.95 Volt	330 Pkt	50 Pkt	93 Pcnt
1790685480	13.88 Volt	340 Pkt	50 Pkt	90 Pcnt
1790685121	13.88 Volt	320 Pkt	50 Pkt	91 Pcnt
1790684760	13.88 Volt	320 Pkt	50 Pkt	91 Pcnt
1790684040	13.95 Volt	320 Pkt	50 Pkt	90 Pcnt
1790683320	13.95 Volt	320 Pkt	50 Pkt	89 Pcnt
1790682600	13.8 Volt	300 Pkt	50 Pkt	90 Pcnt
1790681880	13.88 Volt	300 Pkt	50 Pkt	90 Pcnt
1790681160	13.95 Volt	330 Pkt	50 Pkt	88 Pcnt
1790680440	13.88 Volt	310 Pkt	50 Pkt	88 Pcnt
1790679720	13.88 Volt	300 Pkt	50 Pkt	89 Pcnt
1790679000	13.88 Volt	300 Pkt	50 Pkt	89 Pcnt
1790678280	13.95 Volt	320 Pkt	50 Pkt	91 Pcnt
1790677681	13.88 Volt	310 Pkt	50 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)