This is the latest recevied telemetry packets stored in our database for station/object DM2DXG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1732266776 | 18.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732266176 | 18.53 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732265575 | 18.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732264975 | 18.53 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732264374 | 18.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732263774 | 18.6 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732263173 | 18.6 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732262572 | 18.38 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732261972 | 18.53 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732261371 | 18.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732260771 | 18.38 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1732260170 | 18.3 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1732259569 | 18.38 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1732258969 | 18.23 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1732258368 | 18.3 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1732257768 | 18.23 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1732257167 | 18.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732256567 | 18.15 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732255966 | 18.38 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732255365 | 18.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732254765 | 18.38 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732254164 | 18.15 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732253564 | 18.23 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732252963 | 18.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1732252363 | 18.3 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)