This is the latest recevied telemetry packets stored in our database for station/object KD0MA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732309858 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732308958 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732308058 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732307158 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732306258 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732304458 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732303558 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732302658 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732301758 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732299958 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732299058 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732295458 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732294558 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732293658 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732292758 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732291858 | 13.63 vdc | 49 F | 0 | 0 | 0 |
| 1732290958 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732287358 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732286458 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732285558 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732284658 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732283758 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732282858 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732281958 | 13.7 vdc | 49 F | 0 | 0 | 0 |
| 1732281058 | 13.7 vdc | 49 F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.075, 1.4
Temp: 0, 0.2, 17
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)