APRS Track Direct

My position About ☰

reset

VA2HMC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA2HMC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Tin*	Effall*	Rx1h*
1836274703	13.88 Volt	14.5 °C	61 Pcnt	2.31 Pcnt
1836274553	13.88 Volt	14.5 °C	61 Pcnt	2.79 Pcnt
1836274403	13.88 Volt	14.5 °C	61 Pcnt	2.3 Pcnt
1836274253	13.88 Volt	14.5 °C	61 Pcnt	2.81 Pcnt
1836274103	13.88 Volt	14.5 °C	61 Pcnt	2.31 Pcnt
1774151669	13.88 Volt	8.5 °C	72 Pcnt	3.05 Pcnt
1774151371	13.88 Volt	8.5 °C	72 Pcnt	3.14 Pcnt
1774151369	13.88 Volt	8.5 °C	72 Pcnt	3.14 Pcnt
1774151069	13.88 Volt	8.5 °C	72 Pcnt	3.31 Pcnt
1774150769	13.88 Volt	8.5 °C	72 Pcnt	3.26 Pcnt
1774150469	13.88 Volt	8.5 °C	72 Pcnt	3.3 Pcnt
1774150169	13.88 Volt	9 °C	72 Pcnt	2.2 Pcnt
1774149870	13.88 Volt	9 °C	72 Pcnt	2.94 Pcnt
1774149570	13.88 Volt	9 °C	72 Pcnt	2.97 Pcnt
1774149270	13.88 Volt	9 °C	72 Pcnt	2.8 Pcnt
1774148969	13.88 Volt	9 °C	72 Pcnt	2.74 Pcnt
1774148671	13.88 Volt	9 °C	72 Pcnt	2.78 Pcnt
1774148670	13.88 Volt	9 °C	72 Pcnt	2.78 Pcnt
1774148370	13.88 Volt	9 °C	72 Pcnt	2.72 Pcnt
1774148070	13.88 Volt	9 °C	72 Pcnt	3.24 Pcnt
1774147770	13.88 Volt	9 °C	72 Pcnt	3.18 Pcnt
1774147470	13.88 Volt	9 °C	72 Pcnt	2.83 Pcnt
1774147170	13.88 Volt	9 °C	72 Pcnt	2.84 Pcnt
1774146870	13.88 Volt	9.5 °C	72 Pcnt	2.93 Pcnt
1774146570	13.88 Volt	9.5 °C	72 Pcnt	2.21 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Tin: 0, 0.5, -64

Dg1h: 0, 10, 0

Effall: 0, 1, 0

Rx1h: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)