APRS Track Direct

My position About ☰

reset

HP2DFA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2DFA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1836274392	13.43 Volt	0 Pkt	0 Pkt	100 Pcnt	70 Pkt
1836274242	13.43 Volt	0 Pkt	0 Pkt	100 Pcnt	70 Pkt
1782534937	13.27 Volt	90 Pkt	20 Pkt	61 Pcnt	61 Pkt
1782534337	13.35 Volt	90 Pkt	20 Pkt	60 Pcnt	61 Pkt
1782533737	13.35 Volt	90 Pkt	20 Pkt	59 Pcnt	61 Pkt
1782533137	13.27 Volt	90 Pkt	20 Pkt	61 Pcnt	61 Pkt
1782532537	13.27 Volt	90 Pkt	10 Pkt	61 Pcnt	61 Pkt
1782531937	13.35 Volt	100 Pkt	20 Pkt	60 Pcnt	61 Pkt
1782531337	13.27 Volt	100 Pkt	10 Pkt	61 Pcnt	61 Pkt
1782530737	13.27 Volt	110 Pkt	10 Pkt	64 Pcnt	61 Pkt
1782530137	13.27 Volt	120 Pkt	20 Pkt	66 Pcnt	62 Pkt
1782529537	13.27 Volt	130 Pkt	20 Pkt	65 Pcnt	61 Pkt
1782528937	13.27 Volt	130 Pkt	20 Pkt	64 Pcnt	61 Pkt
1782528337	13.35 Volt	140 Pkt	20 Pkt	64 Pcnt	62 Pkt
1782527737	13.27 Volt	140 Pkt	20 Pkt	61 Pcnt	61 Pkt
1782527137	13.27 Volt	130 Pkt	20 Pkt	59 Pcnt	59 Pkt
1782526537	13.27 Volt	100 Pkt	10 Pkt	57 Pcnt	57 Pkt
1782525937	13.27 Volt	70 Pkt	10 Pkt	55 Pcnt	55 Pkt
1782525337	13.35 Volt	50 Pkt	0 Pkt	55 Pcnt	56 Pkt
1782524737	13.27 Volt	30 Pkt	0 Pkt	53 Pcnt	52 Pkt
1782523907	13.11 Volt	140 Pkt	10 Pkt	59 Pcnt	59 Pkt
1782523307	13.11 Volt	140 Pkt	20 Pkt	59 Pcnt	59 Pkt
1782522707	13.11 Volt	130 Pkt	20 Pkt	58 Pcnt	59 Pkt
1782522107	13.11 Volt	120 Pkt	20 Pkt	55 Pcnt	59 Pkt
1782521507	13.11 Volt	110 Pkt	20 Pkt	54 Pcnt	59 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)