APRS Track Direct

My position About ☰

reset

W6UA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6UA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1758219457	12.9 Volt	60 Pkt	10 Pkt	39 Pcnt	26.5 C
1758218556	12.83 Volt	60 Pkt	20 Pkt	39 Pcnt	26 C
1758217657	12.9 Volt	50 Pkt	20 Pkt	40 Pcnt	25.5 C
1758216757	12.83 Volt	50 Pkt	20 Pkt	40 Pcnt	25.5 C
1758216756	12.83 Volt	50 Pkt	20 Pkt	40 Pcnt	25.5 C
1758215857	12.83 Volt	70 Pkt	30 Pkt	40 Pcnt	25 C
1758214957	12.83 Volt	70 Pkt	30 Pkt	40 Pcnt	24.5 C
1758214956	12.83 Volt	70 Pkt	30 Pkt	40 Pcnt	24.5 C
1758214057	12.9 Volt	70 Pkt	30 Pkt	40 Pcnt	24 C
1758213157	12.83 Volt	70 Pkt	30 Pkt	40 Pcnt	23.5 C
1758213156	12.83 Volt	70 Pkt	30 Pkt	40 Pcnt	23.5 C
1758212257	12.9 Volt	70 Pkt	30 Pkt	40 Pcnt	23.5 C
1758211357	12.9 Volt	100 Pkt	40 Pkt	40 Pcnt	23 C
1758211356	12.9 Volt	100 Pkt	40 Pkt	40 Pcnt	23 C
1758210457	12.9 Volt	110 Pkt	40 Pkt	40 Pcnt	23 C
1758209557	12.9 Volt	130 Pkt	50 Pkt	40 Pcnt	23 C
1758209556	12.9 Volt	130 Pkt	50 Pkt	40 Pcnt	23 C
1758207757	12.9 Volt	140 Pkt	50 Pkt	40 Pcnt	22.5 C
1758207756	12.9 Volt	140 Pkt	50 Pkt	40 Pcnt	22.5 C
1758206857	12.9 Volt	140 Pkt	50 Pkt	40 Pcnt	22.5 C
1758205957	12.83 Volt	110 Pkt	40 Pkt	40 Pcnt	22 C
1758205956	12.83 Volt	110 Pkt	40 Pkt	40 Pcnt	22 C
1758205057	12.9 Volt	90 Pkt	30 Pkt	40 Pcnt	22 C
1758204157	12.9 Volt	50 Pkt	20 Pkt	40 Pcnt	22 C
1758204156	12.9 Volt	50 Pkt	20 Pkt	40 Pcnt	22 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)