APRS Track Direct

My position About ☰

reset

IQ2DK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ2DK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1836274696	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1836274546	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1836274396	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1836274246	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1836274096	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1770153549	39 Pkt	220 Pkt	2.61 Pcnt	51 Pcnt
1770153249	31 Pkt	220 Pkt	2.61 Pcnt	51 Pcnt
1770152949	26 Pkt	220 Pkt	2.61 Pcnt	51 Pcnt
1770152649	33 Pkt	230 Pkt	2.61 Pcnt	51 Pcnt
1770152349	39 Pkt	230 Pkt	2.61 Pcnt	51 Pcnt
1770152049	35 Pkt	230 Pkt	2.61 Pcnt	51 Pcnt
1770151749	40 Pkt	230 Pkt	2.61 Pcnt	51 Pcnt
1770151449	43 Pkt	230 Pkt	2.61 Pcnt	51 Pcnt
1770151149	35 Pkt	220 Pkt	2.61 Pcnt	51 Pcnt
1770150849	39 Pkt	230 Pkt	2.61 Pcnt	51 Pcnt
1770150549	36 Pkt	240 Pkt	2.61 Pcnt	51 Pcnt
1770150249	29 Pkt	240 Pkt	2.61 Pcnt	51 Pcnt
1770149949	35 Pkt	240 Pkt	2.61 Pcnt	51 Pcnt
1770149649	42 Pkt	240 Pkt	2.61 Pcnt	51 Pcnt
1770149349	41 Pkt	240 Pkt	2.61 Pcnt	51 Pcnt
1770149049	34 Pkt	250 Pkt	2.61 Pcnt	51 Pcnt
1770148749	32 Pkt	250 Pkt	2.61 Pcnt	51 Pcnt
1770148449	33 Pkt	260 Pkt	2.61 Pcnt	51 Pcnt
1770148149	37 Pkt	270 Pkt	2.61 Pcnt	51 Pcnt
1770147849	43 Pkt	300 Pkt	2.61 Pcnt	51 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)