APRS Track Direct

My position About ☰

reset

SK3JR-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK3JR-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Bat*	Wind*	Chg*	Temp*
1745055921	14.48 Volt	14.1 Volt	2.7 m/s	0.39 A	10 C
1745054721	14.48 Volt	14.2 Volt	2.7 m/s	0.59 A	9 C
1745053521	14.4 Volt	14.1 Volt	2.7 m/s	0 A	9 C
1745052321	14.4 Volt	14.1 Volt	2.7 m/s	0.59 A	8 C
1745051121	14.4 Volt	14.2 Volt	2.7 m/s	0.39 A	7.5 C
1745049921	14.48 Volt	14.1 Volt	2.7 m/s	0 A	7 C
1745048721	14.4 Volt	14.1 Volt	2.7 m/s	0.78 A	6.5 C
1745047521	14.4 Volt	14.1 Volt	3 m/s	0.78 A	6 C
1745046321	14.03 Volt	13.7 Volt	2.7 m/s	0.39 A	6 C
1745045121	13.88 Volt	13.6 Volt	2.4 m/s	0.2 A	5.5 C
1745043921	13.8 Volt	13.5 Volt	2.4 m/s	0.2 A	4.5 C
1745042721	13.8 Volt	13.5 Volt	2.4 m/s	0.2 A	4.5 C
1745041521	13.8 Volt	13.5 Volt	2.4 m/s	0 A	4 C
1745040321	13.8 Volt	13.5 Volt	2.4 m/s	0 A	4 C
1745039121	13.8 Volt	13.5 Volt	2.4 m/s	0 A	4 C
1745037921	13.8 Volt	13.5 Volt	2.4 m/s	0 A	4 C
1745036721	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4 C
1745035521	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4 C
1745034322	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4 C
1745033121	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4 C
1745031922	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4 C
1745030722	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4.5 C
1745029522	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4.5 C
1745028322	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4.5 C
1745027122	13.8 Volt	13.5 Volt	2.1 m/s	0 A	4.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Bat: 0, 0.1, 0

Wind: 0, 0.3, 0

Chg: 0, 0.1953, -24.8031

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)