This is the latest recevied telemetry packets stored in our database for station/object YU4PTT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Dg/Rx* |
|---|---|---|---|---|---|
| 1836274750 | 12.53 Volt | 200 Pkt | 110 Pkt | 93 % | 54.41 % |
| 1836274150 | 12.53 Volt | 190 Pkt | 100 Pkt | 92 % | 52.06 % |
| 1778027589 | 12.53 Volt | 260 Pkt | 10 Pkt | 76 % | 5.28 % |
| 1778026989 | 12.6 Volt | 270 Pkt | 10 Pkt | 79 % | 5.15 % |
| 1778026389 | 12.6 Volt | 260 Pkt | 10 Pkt | 81 % | 4.91 % |
| 1778025789 | 12.6 Volt | 250 Pkt | 10 Pkt | 81 % | 5.49 % |
| 1778025189 | 12.6 Volt | 250 Pkt | 10 Pkt | 82 % | 4.8 % |
| 1778024589 | 12.6 Volt | 230 Pkt | 10 Pkt | 81 % | 5.53 % |
| 1778023989 | 12.6 Volt | 230 Pkt | 10 Pkt | 79 % | 6.69 % |
| 1778023389 | 12.6 Volt | 220 Pkt | 10 Pkt | 77 % | 6.55 % |
| 1778022789 | 12.6 Volt | 220 Pkt | 10 Pkt | 78 % | 6.17 % |
| 1778022189 | 12.6 Volt | 240 Pkt | 10 Pkt | 79 % | 7.08 % |
| 1778021589 | 12.6 Volt | 230 Pkt | 10 Pkt | 78 % | 6.87 % |
| 1778020989 | 12.6 Volt | 230 Pkt | 10 Pkt | 80 % | 6.09 % |
| 1778020389 | 12.6 Volt | 230 Pkt | 10 Pkt | 85 % | 6.06 % |
| 1778019789 | 12.6 Volt | 220 Pkt | 10 Pkt | 87 % | 6.61 % |
| 1778019189 | 12.6 Volt | 220 Pkt | 10 Pkt | 88 % | 6.17 % |
| 1778018589 | 12.6 Volt | 230 Pkt | 10 Pkt | 89 % | 6.09 % |
| 1778017989 | 12.6 Volt | 220 Pkt | 10 Pkt | 90 % | 6.61 % |
| 1778017389 | 12.6 Volt | 210 Pkt | 10 Pkt | 90 % | 7.34 % |
| 1778016789 | 12.6 Volt | 210 Pkt | 10 Pkt | 88 % | 6.85 % |
| 1778016189 | 12.6 Volt | 220 Pkt | 10 Pkt | 88 % | 6.22 % |
| 1778015589 | 12.6 Volt | 210 Pkt | 10 Pkt | 87 % | 6.67 % |
| 1778014989 | 12.6 Volt | 210 Pkt | 10 Pkt | 87 % | 6.16 % |
| 1778014389 | 12.6 Volt | 210 Pkt | 10 Pkt | 86 % | 5.61 % |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Dg/Rx: 0, 0.001, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)