This is the latest recevied telemetry packets stored in our database for station/object DL2YCP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1741883076 | 20.2 deg C | 37.9 % | 996 hPa | 0 | 0 |
| 1741882177 | 19.6 deg C | 38.3 % | 996 hPa | 0 | 0 |
| 1741881278 | 18.7 deg C | 39.4 % | 995.9 hPa | 0 | 0 |
| 1741880373 | 18.6 deg C | 39.4 % | 995.8 hPa | 0 | 0 |
| 1741879476 | 18.6 deg C | 39.5 % | 995.8 hPa | 0 | 0 |
| 1741878580 | 18.6 deg C | 39.6 % | 995.8 hPa | 0 | 0 |
| 1741878248 | 18.6 deg C | 39.6 % | 995.7 hPa | 0 | 0 |
| 1741877346 | 18.6 deg C | 39.7 % | 995.6 hPa | 0 | 0 |
| 1741876447 | 18.5 deg C | 39.8 % | 995.4 hPa | 0 | 0 |
| 1741875550 | 18.5 deg C | 39.8 % | 995.3 hPa | 0 | 0 |
| 1741874653 | 18.5 deg C | 39.9 % | 995.2 hPa | 0 | 0 |
| 1741873750 | 18.5 deg C | 40 % | 995.1 hPa | 0 | 0 |
| 1741872847 | 18.4 deg C | 39.9 % | 995 hPa | 0 | 0 |
| 1741871945 | 18.4 deg C | 39.9 % | 995 hPa | 0 | 0 |
| 1741871046 | 18.4 deg C | 40 % | 995 hPa | 0 | 0 |
| 1741870150 | 18.4 deg C | 40 % | 995 hPa | 0 | 0 |
| 1741869249 | 18.4 deg C | 39.9 % | 995 hPa | 0 | 0 |
| 1741868343 | 18.4 deg C | 39.7 % | 995 hPa | 0 | 0 |
| 1741867445 | 18.2 deg C | 39.7 % | 995.1 hPa | 0 | 0 |
| 1741866549 | 18.3 deg C | 39.6 % | 995.1 hPa | 0 | 0 |
| 1741865312 | 18.3 deg C | 39.6 % | 995 hPa | 0 | 0 |
| 1741864411 | 18.2 deg C | 39.5 % | 995 hPa | 0 | 0 |
| 1741863513 | 18.2 deg C | 39.5 % | 995.1 hPa | 0 | 0 |
| 1741862608 | 18.2 deg C | 39.4 % | 995.1 hPa | 0 | 0 |
| 1741861712 | 18.3 deg C | 39.2 % | 995.1 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)