This is the latest recevied telemetry packets stored in our database for station/object DL2YCP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750106921 | 25.9 deg C | 50.7 % | 1022.8 hPa | 0 | 0 |
| 1750105121 | 26 deg C | 50.7 % | 1022.7 hPa | 0 | 0 |
| 1750104222 | 26.1 deg C | 50.6 % | 1022.5 hPa | 0 | 0 |
| 1750100626 | 26.1 deg C | 50.4 % | 1022.1 hPa | 0 | 0 |
| 1750097919 | 26 deg C | 50.3 % | 1022 hPa | 0 | 0 |
| 1750097821 | 26 deg C | 50.3 % | 1022.1 hPa | 0 | 0 |
| 1750096918 | 26 deg C | 50.3 % | 1022.1 hPa | 0 | 0 |
| 1750095675 | 25.9 deg C | 50.2 % | 1022.1 hPa | 0 | 0 |
| 1750094780 | 25.8 deg C | 50.2 % | 1022.1 hPa | 0 | 0 |
| 1750092974 | 25.7 deg C | 50.3 % | 1021.9 hPa | 0 | 0 |
| 1750092073 | 25.6 deg C | 50.3 % | 1021.9 hPa | 0 | 0 |
| 1750091178 | 25.5 deg C | 50.4 % | 1021.9 hPa | 0 | 0 |
| 1750090272 | 25.5 deg C | 50.5 % | 1021.9 hPa | 0 | 0 |
| 1750088477 | 25.3 deg C | 50.5 % | 1022 hPa | 0 | 0 |
| 1750087579 | 25.3 deg C | 50.6 % | 1022.1 hPa | 0 | 0 |
| 1750086683 | 25.2 deg C | 50.6 % | 1022.3 hPa | 0 | 0 |
| 1750085781 | 25.1 deg C | 50.6 % | 1022.3 hPa | 0 | 0 |
| 1750084882 | 25.1 deg C | 50.7 % | 1022.4 hPa | 0 | 0 |
| 1750083976 | 25 deg C | 50.7 % | 1022.5 hPa | 0 | 0 |
| 1750083637 | 25 deg C | 50.8 % | 1022.5 hPa | 0 | 0 |
| 1750082739 | 25 deg C | 50.7 % | 1022.6 hPa | 0 | 0 |
| 1750081836 | 24.9 deg C | 50.7 % | 1022.6 hPa | 0 | 0 |
| 1750080936 | 24.9 deg C | 50.7 % | 1022.6 hPa | 0 | 0 |
| 1750080038 | 24.9 deg C | 50.7 % | 1022.7 hPa | 0 | 0 |
| 1750079143 | 24.8 deg C | 50.5 % | 1022.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)