This is the latest recevied telemetry packets stored in our database for station/object OK0BR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274477 | - | - | - | - | - |
| 1836274474 | 21 | 0 | 49 | 55 | 42.22 |
| 1836274474 | 21 | 0 | 49 | 55 | 42.22 |
| 1836274474 | 21 | 0 | 49 | 55 | 42.22 |
| 1836274474 | 21 | 0 | 49 | 55 | 42.22 |
| 1782495155 | 0 | 0 | 0 | 2 | 48.89 |
| 1782494254 | 0 | 0 | 0 | 1 | 49.44 |
| 1782492457 | 0 | 0 | 0 | 7 | 49.44 |
| 1782491556 | 0 | 0 | 0 | 6 | 49.44 |
| 1782490655 | 0 | 0 | 0 | 5 | 49.44 |
| 1782488851 | 0 | 0 | 0 | 3 | 50 |
| 1782487950 | 0 | 0 | 0 | 2 | 51.67 |
| 1782487049 | 0 | 0 | 0 | 1 | 0 |
| 1782485964 | 0 | 0 | 0 | 17 | 50 |
| 1782485063 | 0 | 0 | 0 | 16 | 50.56 |
| 1782484162 | 0 | 0 | 0 | 15 | 51.11 |
| 1782483261 | 0 | 0 | 0 | 14 | 50 |
| 1782482360 | 0 | 0 | 0 | 13 | 50 |
| 1782481459 | 0 | 0 | 0 | 12 | 51.11 |
| 1782480558 | 0 | 0 | 0 | 11 | 51.67 |
| 1782479657 | 1 | 0 | 40 | 10 | 49.44 |
| 1782478756 | 0 | 0 | 0 | 9 | 50.56 |
| 1782477855 | 0 | 0 | 0 | 8 | 50 |
| 1782476954 | 2 | 0 | 40 | 7 | 51.67 |
| 1782476053 | 0 | 0 | 0 | 6 | 50.56 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)