APRS Track Direct

My position About ☰

reset

VK5RPL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RPL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1758219904	18.5 Deg.C	13.8 Volts	34 PTT's	4	7
1758218102	18.5 Deg.C	13.8 Volts	41 PTT's	3	37
1758216308	19 Deg.C	13.8 Volts	33 PTT's	3	7
1758214504	19.5 Deg.C	13.8 Volts	41 PTT's	2	37
1758212703	19.5 Deg.C	13.8 Volts	37 PTT's	2	7
1758210906	20 Deg.C	13.8 Volts	39 PTT's	1	37
1758209105	20 Deg.C	13.8 Volts	35 PTT's	1	7
1758207307	20 Deg.C	13.8 Volts	35 PTT's	0	37
1758205504	20.5 Deg.C	13.8 Volts	36 PTT's	0	7
1758203705	21 Deg.C	13.8 Volts	41 PTT's	23	37
1758201905	22 Deg.C	13.8 Volts	33 PTT's	23	7
1758200109	22 Deg.C	13.8 Volts	40 PTT's	22	37
1758198308	22.5 Deg.C	13.8 Volts	36 PTT's	22	7
1758196503	23 Deg.C	13.8 Volts	42 PTT's	21	37
1758194704	23.5 Deg.C	13.8 Volts	43 PTT's	21	7
1758192904	23.5 Deg.C	13.8 Volts	38 PTT's	20	37
1758191103	24 Deg.C	13.8 Volts	32 PTT's	20	7
1758189304	25 Deg.C	13.8 Volts	42 PTT's	19	37
1758187504	25 Deg.C	13.8 Volts	40 PTT's	19	7
1758185704	25.5 Deg.C	13.8 Volts	44 PTT's	18	37
1758183907	25.5 Deg.C	13.8 Volts	40 PTT's	18	7
1758182104	25.5 Deg.C	13.8 Volts	49 PTT's	17	37
1758180303	25.5 Deg.C	13.8 Volts	47 PTT's	17	7
1758178503	25.5 Deg.C	13.8 Volts	57 PTT's	16	37
1758176705	25 Deg.C	13.8 Volts	62 PTT's	16	7

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)