APRS Track Direct

My position About ☰

reset

SR9WXY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9WXY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1732269326	109 Pkt	8 Pkt	5 Pkt	14 DegC
1732268726	112 Pkt	12 Pkt	10 Pkt	14 DegC
1732268126	93 Pkt	7 Pkt	4 Pkt	14 DegC
1732267526	102 Pkt	7 Pkt	5 Pkt	14 DegC
1732266926	93 Pkt	10 Pkt	7 Pkt	14 DegC
1732266326	92 Pkt	9 Pkt	7 Pkt	14 DegC
1732265726	125 Pkt	10 Pkt	8 Pkt	14 DegC
1732265116	101 Pkt	12 Pkt	9 Pkt	14 DegC
1732264514	115 Pkt	8 Pkt	6 Pkt	14 DegC
1732263914	115 Pkt	10 Pkt	7 Pkt	14 DegC
1732263311	123 Pkt	15 Pkt	13 Pkt	14 DegC
1732262712	120 Pkt	14 Pkt	11 Pkt	14 DegC
1732262112	128 Pkt	9 Pkt	7 Pkt	14 DegC
1732261511	90 Pkt	11 Pkt	8 Pkt	14 DegC
1732260310	141 Pkt	15 Pkt	12 Pkt	14 DegC
1732259710	98 Pkt	14 Pkt	12 Pkt	14 DegC
1732258511	117 Pkt	10 Pkt	7 Pkt	14 DegC
1732257909	123 Pkt	11 Pkt	9 Pkt	14 DegC
1732257309	117 Pkt	9 Pkt	6 Pkt	14 DegC
1732256707	99 Pkt	14 Pkt	8 Pkt	13.5 DegC
1732256097	123 Pkt	13 Pkt	10 Pkt	13.5 DegC
1732255497	128 Pkt	12 Pkt	10 Pkt	13.5 DegC
1732254897	107 Pkt	10 Pkt	7 Pkt	13.5 DegC
1732254297	100 Pkt	8 Pkt	6 Pkt	13.5 DegC
1732253697	107 Pkt	10 Pkt	7 Pkt	13.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)