APRS Track Direct

My position About ☰

reset

DB0ERF-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0ERF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732269905	0.06 Rx Erlang	0.09 Tx Erlang	41 count/10m	1 count/10m	59 count/10m
1732268704	0.05 Rx Erlang	0.08 Tx Erlang	37 count/10m	2 count/10m	56 count/10m
1732267504	0.04 Rx Erlang	0.08 Tx Erlang	22 count/10m	1 count/10m	31 count/10m
1732266055	0.05 Rx Erlang	0.09 Tx Erlang	47 count/10m	1 count/10m	58 count/10m
1732264855	0.03 Rx Erlang	0.08 Tx Erlang	26 count/10m	0 count/10m	53 count/10m
1732263655	0.03 Rx Erlang	0.09 Tx Erlang	24 count/10m	0 count/10m	58 count/10m
1732262455	0.04 Rx Erlang	0.08 Tx Erlang	32 count/10m	0 count/10m	53 count/10m
1732261255	0.04 Rx Erlang	0.08 Tx Erlang	33 count/10m	1 count/10m	53 count/10m
1732260055	0.04 Rx Erlang	0.09 Tx Erlang	28 count/10m	1 count/10m	58 count/10m
1732258855	0.06 Rx Erlang	0.1 Tx Erlang	40 count/10m	4 count/10m	62 count/10m
1732257654	0.05 Rx Erlang	0.08 Tx Erlang	45 count/10m	7 count/10m	52 count/10m
1732256454	0.03 Rx Erlang	0.1 Tx Erlang	28 count/10m	1 count/10m	64 count/10m
1732255254	0.04 Rx Erlang	0.08 Tx Erlang	33 count/10m	1 count/10m	56 count/10m
1732254054	0.04 Rx Erlang	0.08 Tx Erlang	37 count/10m	0 count/10m	56 count/10m
1732252854	0.05 Rx Erlang	0.09 Tx Erlang	38 count/10m	2 count/10m	57 count/10m
1732251654	0.04 Rx Erlang	0.08 Tx Erlang	34 count/10m	2 count/10m	51 count/10m
1732250454	0.04 Rx Erlang	0.08 Tx Erlang	31 count/10m	0 count/10m	56 count/10m
1732249253	0.03 Rx Erlang	0.09 Tx Erlang	23 count/10m	0 count/10m	55 count/10m
1732248054	0.04 Rx Erlang	0.08 Tx Erlang	22 count/10m	1 count/10m	53 count/10m
1732246854	0.03 Rx Erlang	0.07 Tx Erlang	24 count/10m	0 count/10m	51 count/10m
1732245654	0.04 Rx Erlang	0.09 Tx Erlang	33 count/10m	1 count/10m	58 count/10m
1732244453	0.03 Rx Erlang	0.08 Tx Erlang	26 count/10m	1 count/10m	52 count/10m
1732243253	0.03 Rx Erlang	0.08 Tx Erlang	26 count/10m	2 count/10m	50 count/10m
1732242053	0.03 Rx Erlang	0.08 Tx Erlang	23 count/10m	0 count/10m	54 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)