This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | 18B20* | CPU* | Temp* | Press* | Alt* |
|---|---|---|---|---|---|
| 1836274741 | 127.3 | 0 | 0 | 700 | 0 |
| 1836274441 | 127.3 | 0 | 0 | 700 | 0 |
| 1836274290 | 127.3 | 0 | 0 | 700 | 0 |
| 1836274141 | 127.3 | 0 | 0 | 700 | 0 |
| 1762300566 | 128 | 21.4 | 2.7 | 700 | 0 |
| 1762300265 | 128.1 | 21.1 | 2.7 | 700 | 0 |
| 1762299967 | 128.2 | 21.7 | 2.8 | 700 | 0 |
| 1762299667 | 128.4 | 26.1 | 3.4 | 700 | 0 |
| 1762299366 | 128.7 | 33.2 | 4.3 | 700 | 0 |
| 1762299067 | 129.1 | 40.4 | 5.2 | 700 | 0 |
| 1762298767 | 129.3 | 43.1 | 5.6 | 700 | 0 |
| 1762298472 | 129.4 | 40.4 | 5.2 | 700 | 0 |
| 1762298166 | 130.1 | 54.8 | 7.1 | 700 | 0 |
| 1762297867 | 130.2 | 37.1 | 4.8 | 700 | 0 |
| 1762297567 | 135.3 | 123.5 | 16.7 | 700 | 0 |
| 1762297267 | 134.5 | 117.4 | 15.8 | 700 | 0 |
| 1762296966 | 134.6 | 121.1 | 16.3 | 700 | 0 |
| 1762296666 | 135 | 122 | 16.5 | 700 | 0 |
| 1762296367 | 135.8 | 129.8 | 17.6 | 700 | 0 |
| 1762296067 | 132.2 | 86.6 | 11.4 | 700 | 0 |
| 1762295766 | 135 | 124.1 | 16.8 | 700 | 0 |
| 1762295467 | 135 | 124.6 | 16.8 | 700 | 0 |
| 1762295167 | 134.5 | 147.2 | 19.8 | 700 | 0 |
| 1762294867 | 132.2 | 80.5 | 10.6 | 700 | 0 |
| 1762294566 | 135.1 | 128.6 | 17.4 | 700 | 0 |
*Used Equation Coefficients:
18B20: 0, 0.1, 0
CPU: 0, 0.1, 0
Temp: 0, 0.1, 0
Press: 0, 0.1, 700
Alt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)