This is the latest recevied telemetry packets stored in our database for station/object ED3YBA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719848779 | 139 | 125 | 145 | 140 | 144 |
1719847879 | 143 | 127 | 163 | 140 | 144 |
1719846966 | 140 | 129 | 147 | 139 | 144 |
1719846065 | 143 | 131 | 150 | 138 | 144 |
1719845149 | 139 | 130 | 146 | 135 | 144 |
1719843308 | 139 | 125 | 81 | 139 | 146 |
1719842406 | 142 | 128 | 148 | 139 | 146 |
1719841495 | 140 | 132 | 147 | 139 | 146 |
1719840594 | 138 | 126 | 145 | 141 | 146 |
1719839664 | 139 | 126 | 145 | 142 | 146 |
1719838755 | 143 | 130 | 150 | 142 | 146 |
1719837837 | 141 | 131 | 149 | 143 | 146 |
1719836927 | 141 | 130 | 149 | 143 | 145 |
1719836015 | 141 | 133 | 148 | 142 | 145 |
1719835094 | 138 | 127 | 145 | 142 | 144 |
1719834176 | 139 | 130 | 147 | 143 | 144 |
1719833273 | 141 | 136 | 149 | 142 | 143 |
1719832362 | 141 | 137 | 149 | 142 | 141 |
1719830548 | 138 | 132 | 146 | 138 | 139 |
1719829632 | 138 | 133 | 146 | 136 | 139 |
1719828724 | 138 | 132 | 145 | 135 | 138 |
1719827823 | 137 | 131 | 145 | 134 | 138 |
1719826915 | 137 | 131 | 145 | 132 | 137 |
1719826016 | 137 | 131 | 144 | 132 | 137 |
1719825106 | 137 | 130 | 144 | 132 | 137 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)