This is the latest recevied telemetry packets stored in our database for station/object F1ZYG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperature* | CPU Raspberry* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786727302 | 35.5 | 67.1 | 0 | 0 | 0 |
| 1786726462 | 35.9 | 66.6 | 0 | 0 | 0 |
| 1786725623 | 36.9 | 66.6 | 0 | 0 | 0 |
| 1786724782 | 36.5 | 66.6 | 0 | 0 | 0 |
| 1786723944 | 36.7 | 66.6 | 0 | 0 | 0 |
| 1786723102 | 36.9 | 66.6 | 0 | 0 | 0 |
| 1786722262 | 37.2 | 66.6 | 0 | 0 | 0 |
| 1786721422 | 37.2 | 66.6 | 0 | 0 | 0 |
| 1786720581 | 37 | 66.6 | 0 | 0 | 0 |
| 1786719746 | 37.2 | 66.6 | 0 | 0 | 0 |
| 1786718901 | 37.4 | 66.6 | 0 | 0 | 0 |
| 1786718063 | 37.6 | 67.1 | 0 | 0 | 0 |
| 1786717222 | 37.6 | 66.1 | 0 | 0 | 0 |
| 1786716382 | 38.9 | 65.5 | 0 | 0 | 0 |
| 1786715542 | 39.2 | 65.5 | 0 | 0 | 0 |
| 1786714701 | 38.4 | 65.5 | 0 | 0 | 0 |
| 1786713862 | 38.4 | 65 | 0 | 0 | 0 |
| 1786713022 | 38.4 | 64.5 | 0 | 0 | 0 |
| 1786712182 | 38.3 | 64.5 | 0 | 0 | 0 |
| 1786711343 | 37.8 | 63.9 | 0 | 0 | 0 |
| 1786710502 | 37.6 | 64.5 | 0 | 0 | 0 |
| 1786709662 | 36.1 | 64.5 | 0 | 0 | 0 |
| 1786708822 | 33.9 | 64.5 | 0 | 0 | 0 |
| 1786707982 | 34.5 | 64.5 | 0 | 0 | 0 |
| 1786707144 | 33.9 | 64.5 | 0 | 0 | 0 |
*Used Equation Coefficients:
Temperature: 0, 0.1, 0
CPU Raspberry: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)