This is the latest recevied telemetry packets stored in our database for station/object K6CHE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758238079 | 1 | 0 | 0 | 11 | 0 |
| 1758236879 | 2 | 0 | 0 | 11 | 1 |
| 1758234479 | 0 | 1 | 0 | 12 | 1 |
| 1758233279 | 0 | 0 | 0 | 10 | 0 |
| 1758232079 | 0 | 0 | 0 | 12 | 0 |
| 1758230879 | 0 | 0 | 0 | 12 | 0 |
| 1758229679 | 0 | 0 | 0 | 12 | 1 |
| 1758228479 | 0 | 0 | 0 | 12 | 1 |
| 1758227279 | 0 | 0 | 0 | 12 | 0 |
| 1758226078 | 2 | 0 | 0 | 11 | 0 |
| 1758224879 | 0 | 0 | 0 | 10 | 0 |
| 1758223678 | 0 | 0 | 0 | 12 | 0 |
| 1758221279 | 0 | 0 | 0 | 12 | 0 |
| 1758220078 | 0 | 0 | 0 | 12 | 0 |
| 1758218878 | 1 | 0 | 0 | 12 | 0 |
| 1758217679 | 1 | 0 | 0 | 11 | 0 |
| 1758215278 | 1 | 0 | 0 | 11 | 0 |
| 1758214079 | 0 | 0 | 0 | 12 | 0 |
| 1758212878 | 0 | 0 | 0 | 12 | 0 |
| 1758211678 | 0 | 0 | 1 | 12 | 0 |
| 1758210479 | 0 | 0 | 0 | 12 | 0 |
| 1758209278 | 0 | 0 | 0 | 12 | 0 |
| 1758208078 | 1 | 0 | 0 | 11 | 0 |
| 1758206879 | 0 | 0 | 1 | 12 | 0 |
| 1758205678 | 0 | 0 | 0 | 12 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)