This is the latest recevied telemetry packets stored in our database for station/object KK5CM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Room* | Battery* | Eff1h* | Rx1h* | Dg1h* |
---|---|---|---|---|---|
1754430751 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754430151 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754429551 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754428951 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754428351 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754427751 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754427151 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754426551 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754425951 | 21 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754425351 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754424751 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754424151 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754423551 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754422951 | 20.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754422351 | 20 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754421751 | 20 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754421151 | 20 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754420551 | 20 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754419951 | 20 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754419351 | 20 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754418751 | 19.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754418151 | 19.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754417551 | 19.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754416351 | 19.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
1754415751 | 19.5 C | 13.5 Volt | 100 Pcnt | 0 Pkt | 0 Pkt |
*Used Equation Coefficients:
Room: 0, 0.5, -64
Battery: 0, 0.075, 0
Eff1h: 0, 1, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)