APRS Track Direct

My position About ☰

reset

SUNLGT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SUNLGT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1733951626	13.51 Volt	550 Pkt	80 Pkt	68 Pcnt
1733951626	13.51 Volt	550 Pkt	80 Pkt	68 Pcnt
1733951026	13.51 Volt	550 Pkt	80 Pkt	68 Pcnt
1733951026	13.51 Volt	550 Pkt	80 Pkt	68 Pcnt
1733950426	13.51 Volt	530 Pkt	80 Pkt	68 Pcnt
1733950426	13.51 Volt	530 Pkt	80 Pkt	68 Pcnt
1733949826	13.51 Volt	530 Pkt	90 Pkt	66 Pcnt
1733949826	13.51 Volt	530 Pkt	90 Pkt	66 Pcnt
1733949226	13.51 Volt	520 Pkt	90 Pkt	66 Pcnt
1733949226	13.51 Volt	520 Pkt	90 Pkt	66 Pcnt
1733948627	13.51 Volt	510 Pkt	90 Pkt	64 Pcnt
1733948626	13.51 Volt	510 Pkt	90 Pkt	64 Pcnt
1733948027	13.51 Volt	510 Pkt	90 Pkt	64 Pcnt
1733948026	13.51 Volt	510 Pkt	90 Pkt	64 Pcnt
1733947427	13.51 Volt	490 Pkt	90 Pkt	63 Pcnt
1733947426	13.51 Volt	490 Pkt	90 Pkt	63 Pcnt
1733946827	13.51 Volt	480 Pkt	90 Pkt	63 Pcnt
1733946826	13.51 Volt	480 Pkt	90 Pkt	63 Pcnt
1733946227	13.51 Volt	460 Pkt	90 Pkt	63 Pcnt
1733946226	13.51 Volt	460 Pkt	90 Pkt	63 Pcnt
1733945627	13.51 Volt	460 Pkt	90 Pkt	64 Pcnt
1733945626	13.51 Volt	460 Pkt	90 Pkt	64 Pcnt
1733945027	13.51 Volt	450 Pkt	90 Pkt	63 Pcnt
1733945026	13.51 Volt	450 Pkt	90 Pkt	63 Pcnt
1733944427	13.51 Volt	450 Pkt	80 Pkt	63 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)