APRS Track Direct

My position About ☰

reset

HS8AC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS8AC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1778056563	11 Pkt	0 Pkt	-29 dBm	13.43 V
1778055939	9 Pkt	6 Pkt	-29 dBm	13.47 V
1778055315	18 Pkt	1 Pkt	-29 dBm	13.43 V
1778054690	14 Pkt	1 Pkt	-29 dBm	13.43 V
1778054066	12 Pkt	0 Pkt	-29 dBm	13.47 V
1778053442	15 Pkt	0 Pkt	-29 dBm	13.47 V
1778052818	13 Pkt	0 Pkt	-28 dBm	13.43 V
1778052194	13 Pkt	0 Pkt	-28 dBm	13.47 V
1778051570	8 Pkt	0 Pkt	-29 dBm	13.41 V
1778050946	17 Pkt	0 Pkt	-29 dBm	13.47 V
1778050322	14 Pkt	0 Pkt	-29 dBm	13.47 V
1778049697	19 Pkt	0 Pkt	-29 dBm	13.43 V
1778049073	26 Pkt	0 Pkt	-30 dBm	13.41 V
1778048448	25 Pkt	0 Pkt	-29 dBm	13.41 V
1778047823	17 Pkt	1 Pkt	-29 dBm	13.41 V
1778047199	18 Pkt	1 Pkt	-29 dBm	13.47 V
1778046575	11 Pkt	0 Pkt	-29 dBm	13.47 V
1778045950	13 Pkt	0 Pkt	-28 dBm	13.43 V
1778045326	14 Pkt	0 Pkt	-28 dBm	13.47 V
1778044702	13 Pkt	0 Pkt	-29 dBm	13.43 V
1778044078	20 Pkt	0 Pkt	-29 dBm	13.47 V
1778043453	16 Pkt	0 Pkt	-29 dBm	13.47 V
1778042829	12 Pkt	0 Pkt	-29 dBm	13.47 V
1778042205	18 Pkt	0 Pkt	-29 dBm	13.43 V
1778041580	13 Pkt	0 Pkt	-29 dBm	13.47 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)