This is the latest recevied telemetry packets stored in our database for station/object DL6DCA-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1786737214 | 3.21 VDC | 35.6 C | 23.33 % | 1017 hPa | 0 |
| 1786728184 | 3.48 VDC | 40.7 C | 19.66 % | 1016.88 hPa | 0 |
| 1786719154 | 3.64 VDC | 50 C | 14.05 % | 1019.25 hPa | 0 |
| 1786711012 | 4.02 VDC | 47.4 C | 11.17 % | 1015.25 hPa | 0 |
| 1786710614 | 4 VDC | 47.2 C | 9.03 % | 1018.25 hPa | 0 |
| 1786709950 | 3.98 VDC | 47.5 C | 9.97 % | 1018.13 hPa | 0 |
| 1786702246 | 3.6 VDC | 48.1 C | 10.65 % | 1018.75 hPa | 0 |
| 1786701907 | 2.98 VDC | 44 C | 20.16 % | 1011.5 hPa | 0 |
| 1786696665 | 3.7 VDC | 35.9 C | 21.36 % | 1020.75 hPa | 0 |
| 1786695777 | 3.12 VDC | 30 C | 27.47 % | 1022.88 hPa | 0 |
| 1786693774 | 3.59 VDC | 26.4 C | 32.56 % | 1012.38 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)