This is the latest recevied telemetry packets stored in our database for station/object DG2HAM-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1762285203 | 3.79 VDC | 15.7 C | 72.53 % | 1015.75 hPa | 0 |
| 1762285097 | 3.79 VDC | 15.6 C | 72.26 % | 1020.88 hPa | 0 |
| 1762284974 | 3.79 VDC | 15.5 C | 72.54 % | 1020.63 hPa | 0 |
| 1762284858 | 3.79 VDC | 15.5 C | 72.42 % | 1019.13 hPa | 0 |
| 1762284680 | 3.79 VDC | 15.3 C | 72.69 % | 1019.38 hPa | 0 |
| 1762284604 | 3.79 VDC | 15.3 C | 72.66 % | 1014.5 hPa | 0 |
| 1762284269 | 3.8 VDC | 15.7 C | 71.57 % | 1017.63 hPa | 0 |
| 1762257179 | 4.03 VDC | 17.7 C | 72.45 % | 1018.13 hPa | 0 |
| 1762255309 | 4.04 VDC | 18.2 C | 68.03 % | 1017 hPa | 0 |
| 1762254763 | 4.05 VDC | 18 C | 68.47 % | 1019.38 hPa | 0 |
| 1762254683 | 4.05 VDC | 18.1 C | 68.73 % | 1018.88 hPa | 0 |
| 1762254531 | 4.05 VDC | 18.4 C | 68.49 % | 1018 hPa | 0 |
| 1762254303 | 4.05 VDC | 20.9 C | 70.64 % | 1014.13 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)