This is the latest recevied telemetry packets stored in our database for station/object EL-PU2UJN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770130725 | 2 | 83 | 4 | 6 | 0 |
| 1770130125 | 0 | 73 | 0 | 4 | 0 |
| 1770129525 | 0 | 80 | 0 | 5 | 0 |
| 1770128925 | 0 | 15 | 0 | 2 | 0 |
| 1770128325 | 0 | 21 | 0 | 4 | 0 |
| 1770127725 | 0 | 43 | 0 | 2 | 0 |
| 1770127125 | 0 | 18 | 0 | 3 | 0 |
| 1770126525 | 0 | 159 | 0 | 3 | 0 |
| 1770125925 | 0 | 425 | 0 | 17 | 0 |
| 1770125325 | 0 | 29 | 0 | 5 | 0 |
| 1770124725 | 0 | 48 | 0 | 10 | 0 |
| 1770124125 | 0 | 35 | 0 | 1 | 0 |
| 1770123525 | 0 | 182 | 0 | 4 | 0 |
| 1770122925 | 0 | 789 | 0 | 15 | 0 |
| 1770122325 | 0 | 514 | 0 | 13 | 0 |
| 1770121725 | 0 | 916 | 0 | 10 | 0 |
| 1770121125 | 0 | 830 | 0 | 28 | 0 |
| 1770120525 | 0 | 499 | 0 | 10 | 0 |
| 1770119925 | 0 | 317 | 0 | 13 | 0 |
| 1770119325 | 0 | 122 | 0 | 5 | 0 |
| 1770118725 | 0 | 38 | 0 | 2 | 0 |
| 1770118125 | 0 | 9 | 0 | 1 | 0 |
| 1770117525 | 0 | 9 | 0 | 1 | 0 |
| 1770116925 | 0 | 118 | 0 | 6 | 0 |
| 1770116325 | 0 | 24 | 0 | 6 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)