This is the latest recevied telemetry packets stored in our database for station/object OE3MZC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1836274287 | 987.6 hPa | 24.8 C deg | 49.8 % | 238 - | 0 C deg |
| 1782492572 | 982.9 hPa | 31.7 C deg | 37 % | 558 - | 0 C deg |
| 1782485312 | 983.3 hPa | 31 C deg | 37.5 % | 576 - | 0 C deg |
| 1782468975 | 984.5 hPa | 30.2 C deg | 37.6 % | 579 - | 0 C deg |
| 1782467165 | 984.6 hPa | 30.1 C deg | 37.7 % | 577 - | 0 C deg |
| 1782458086 | 984.5 hPa | 30.1 C deg | 37.5 % | 574 - | 0 C deg |
| 1782456271 | 984.4 hPa | 30.1 C deg | 37.2 % | 574 - | 0 C deg |
| 1782452642 | 984.1 hPa | 30.1 C deg | 37.3 % | 568 - | 0 C deg |
| 1782450828 | 984 hPa | 30.1 C deg | 37.4 % | 566 - | 0 C deg |
| 1782443566 | 983.3 hPa | 30.3 C deg | 38.2 % | 559 - | 0 C deg |
| 1782441751 | 983.3 hPa | 30.3 C deg | 38.2 % | 559 - | 0 C deg |
| 1782438118 | 983.2 hPa | 30.4 C deg | 38.2 % | 557 - | 0 C deg |
| 1782434490 | 983.3 hPa | 30.5 C deg | 38.2 % | 561 - | 0 C deg |
| 1782425414 | 983.3 hPa | 30.7 C deg | 38.1 % | 566 - | 0 C deg |
| 1782421796 | 983 hPa | 30.8 C deg | 37.9 % | 575 - | 0 C deg |
| 1782418152 | 982.7 hPa | 30.8 C deg | 37.7 % | 582 - | 0 C deg |
| 1782416338 | 982.6 hPa | 30.8 C deg | 37.6 % | 583 - | 0 C deg |
| 1782414525 | 982.4 hPa | 30.8 C deg | 37.5 % | 589 - | 0 C deg |
| 1782412707 | 982.1 hPa | 30.9 C deg | 37.3 % | 588 - | 0 C deg |
| 1782410894 | 982.1 hPa | 31.2 C deg | 36.6 % | 591 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)