This is the latest recevied telemetry packets stored in our database for station/object DF4ND-24. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1754151949 | 971 hPa | 22.5 C deg | 48.7 % | 1014.1 hPa | 0 C deg |
| 1754150149 | 970.9 hPa | 22.4 C deg | 48.7 % | 1014 hPa | 0 C deg |
| 1754148349 | 970.9 hPa | 22.3 C deg | 48.8 % | 1014 hPa | 0 C deg |
| 1754146549 | 970.8 hPa | 22.2 C deg | 48.8 % | 1014 hPa | 0 C deg |
| 1754144749 | 970.5 hPa | 22.1 C deg | 48.6 % | 1013.6 hPa | 0 C deg |
| 1754142949 | 970.4 hPa | 22 C deg | 48.6 % | 1013.6 hPa | 0 C deg |
| 1754141148 | 970.5 hPa | 21.9 C deg | 48.6 % | 1013.7 hPa | 0 C deg |
| 1754139348 | 970.7 hPa | 21.7 C deg | 48.7 % | 1014 hPa | 0 C deg |
| 1754137548 | 970.8 hPa | 21.5 C deg | 49 % | 1014 hPa | 0 C deg |
| 1754132912 | 970.6 hPa | 20.5 C deg | 50.8 % | 1014 hPa | 0 C deg |
| 1754129312 | 970.3 hPa | 20.2 C deg | 49.6 % | 1013.8 hPa | 0 C deg |
| 1754127512 | 970.2 hPa | 20 C deg | 50.2 % | 1013.7 hPa | 0 C deg |
| 1754125711 | 970.4 hPa | 19.9 C deg | 50.8 % | 1013.9 hPa | 0 C deg |
| 1754123911 | 970.2 hPa | 19.9 C deg | 51.6 % | 1013.7 hPa | 0 C deg |
| 1754122111 | 970.1 hPa | 19.8 C deg | 52.1 % | 1013.6 hPa | 0 C deg |
| 1754121823 | 970.1 hPa | 19.8 C deg | 54 % | 1013.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)