This is the latest recevied telemetry packets stored in our database for station/object SP1RKB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Rx1h* | Dg1h* | Eff1h* | Eff* |
|---|---|---|---|---|---|
| 1770131347 | 19.5 C | 60 Pkt | 0 Pkt | 63 Pcnt | 71 Pcnt |
| 1770130147 | 19 C | 60 Pkt | 0 Pkt | 62 Pcnt | 71 Pcnt |
| 1770128947 | 18.5 C | 30 Pkt | 0 Pkt | 63 Pcnt | 72 Pcnt |
| 1770128947 | 18.5 C | 30 Pkt | 0 Pkt | 63 Pcnt | 72 Pcnt |
| 1770127747 | 18 C | 20 Pkt | 0 Pkt | 65 Pcnt | 72 Pcnt |
| 1770126547 | 18 C | 20 Pkt | 0 Pkt | 72 Pcnt | 72 Pcnt |
| 1770125347 | 18 C | 20 Pkt | 0 Pkt | 76 Pcnt | 73 Pcnt |
| 1770124147 | 18 C | 30 Pkt | 0 Pkt | 78 Pcnt | 73 Pcnt |
| 1770122947 | 18.5 C | 40 Pkt | 0 Pkt | 81 Pcnt | 73 Pcnt |
| 1770121748 | 19 C | 30 Pkt | 0 Pkt | 76 Pcnt | 72 Pcnt |
| 1770121747 | 19 C | 30 Pkt | 0 Pkt | 76 Pcnt | 72 Pcnt |
| 1770120547 | 19 C | 30 Pkt | 0 Pkt | 71 Pcnt | 72 Pcnt |
| 1770119347 | 18 C | 30 Pkt | 0 Pkt | 65 Pcnt | 72 Pcnt |
| 1770118148 | 18.5 C | 20 Pkt | 0 Pkt | 56 Pcnt | 72 Pcnt |
| 1770118147 | 18.5 C | 20 Pkt | 0 Pkt | 56 Pcnt | 72 Pcnt |
| 1770116947 | 18 C | 40 Pkt | 0 Pkt | 61 Pcnt | 72 Pcnt |
| 1770115747 | 18.5 C | 50 Pkt | 0 Pkt | 59 Pcnt | 72 Pcnt |
| 1770114548 | 18.5 C | 40 Pkt | 0 Pkt | 57 Pcnt | 73 Pcnt |
| 1770114547 | 18.5 C | 40 Pkt | 0 Pkt | 57 Pcnt | 73 Pcnt |
| 1770113347 | 18.5 C | 40 Pkt | 0 Pkt | 60 Pcnt | 73 Pcnt |
| 1770112147 | 18.5 C | 50 Pkt | 0 Pkt | 72 Pcnt | 74 Pcnt |
| 1770110948 | 18.5 C | 50 Pkt | 0 Pkt | 79 Pcnt | 75 Pcnt |
| 1770110947 | 18.5 C | 50 Pkt | 0 Pkt | 79 Pcnt | 75 Pcnt |
| 1770109747 | 18.5 C | 50 Pkt | 0 Pkt | 78 Pcnt | 75 Pcnt |
| 1770108547 | 18.5 C | 80 Pkt | 0 Pkt | 70 Pcnt | 74 Pcnt |
*Used Equation Coefficients:
Temp: 0, 0.5, -64
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)