This is the latest recevied telemetry packets stored in our database for station/object N3EG-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774148487 | 117 | 55 | 4 | 0 | 0 |
| 1774146687 | 117 | 56 | 4 | 0 | 0 |
| 1774144887 | 117 | 57 | 4 | 0 | 0 |
| 1774143087 | 117 | 58 | 4 | 0 | 0 |
| 1774141287 | 117 | 59 | 4 | 0 | 0 |
| 1774139487 | 117 | 60 | 4 | 0 | 0 |
| 1774137687 | 117 | 61 | 4 | 0 | 0 |
| 1774135887 | 118 | 62 | 4 | 0 | 0 |
| 1774134087 | 117 | 63 | 4 | 0 | 0 |
| 1774132287 | 117 | 61 | 4 | 0 | 0 |
| 1774130487 | 117 | 59 | 4 | 0 | 0 |
| 1774128687 | 117 | 57 | 4 | 0 | 0 |
| 1774126887 | 117 | 55 | 4 | 0 | 0 |
| 1774125087 | 117 | 53 | 4 | 0 | 0 |
| 1774123286 | 117 | 51 | 4 | 0 | 0 |
| 1774121486 | 117 | 49 | 4 | 0 | 0 |
| 1774119686 | 117 | 47 | 4 | 0 | 0 |
| 1774117886 | 117 | 46 | 3 | 0 | 0 |
| 1774116086 | 118 | 45 | 4 | 0 | 0 |
| 1774114286 | 118 | 45 | 3 | 0 | 0 |
| 1774112486 | 118 | 44 | 4 | 0 | 0 |
| 1774110686 | 118 | 44 | 3 | 0 | 0 |
| 1774108886 | 118 | 44 | 3 | 0 | 0 |
| 1774107086 | 118 | 44 | 3 | 0 | 0 |
| 1774105286 | 118 | 45 | 4 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)