APRS Track Direct

My position About ☰

reset

9W2FRP-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2FRP-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1754207968	0.05 Load	47.77 DegC	172 Mb	955 Pkt	339 Pkt
1754207669	0.12 Load	48.31 DegC	171 Mb	967 Pkt	306 Pkt
1754207369	0.07 Load	48.31 DegC	140 Mb	1132 Pkt	508 Pkt
1754207068	0.05 Load	47.77 DegC	142 Mb	1225 Pkt	576 Pkt
1754206768	0.04 Load	47.77 DegC	145 Mb	1148 Pkt	457 Pkt
1754206469	0.05 Load	47.77 DegC	146 Mb	1172 Pkt	426 Pkt
1754206168	0.07 Load	47.77 DegC	139 Mb	1175 Pkt	460 Pkt
1754205868	0.07 Load	47.77 DegC	143 Mb	1205 Pkt	474 Pkt
1754205569	0.09 Load	48.31 DegC	150 Mb	1120 Pkt	266 Pkt
1754205269	0.14 Load	47.77 DegC	146 Mb	1167 Pkt	362 Pkt
1754204968	0.08 Load	47.77 DegC	141 Mb	1200 Pkt	304 Pkt
1754204668	0.05 Load	47.77 DegC	146 Mb	1242 Pkt	446 Pkt
1754204369	0.1 Load	47.24 DegC	141 Mb	1012 Pkt	149 Pkt
1754204068	0.21 Load	47.77 DegC	150 Mb	982 Pkt	261 Pkt
1754203768	0.06 Load	47.77 DegC	138 Mb	826 Pkt	132 Pkt
1754203468	0.05 Load	47.77 DegC	145 Mb	948 Pkt	203 Pkt
1754203169	0.09 Load	47.24 DegC	137 Mb	916 Pkt	127 Pkt
1754202868	0.06 Load	47.77 DegC	140 Mb	882 Pkt	249 Pkt
1754202568	0.07 Load	47.24 DegC	137 Mb	907 Pkt	132 Pkt
1754202269	0.06 Load	47.24 DegC	147 Mb	934 Pkt	203 Pkt
1754201969	0.08 Load	47.24 DegC	144 Mb	889 Pkt	150 Pkt
1754201668	0.1 Load	47.24 DegC	144 Mb	998 Pkt	218 Pkt
1754201368	0.11 Load	47.24 DegC	144 Mb	977 Pkt	146 Pkt
1754201069	0.07 Load	47.24 DegC	145 Mb	1320 Pkt	584 Pkt
1754200769	0.11 Load	47.24 DegC	145 Mb	1083 Pkt	371 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)