APRS Track Direct

My position About ☰

reset

IR1UFB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1UFB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1770130495	84 Pkt	480 Pkt	0.55 Pcnt	58 Pcnt
1770130195	78 Pkt	490 Pkt	0.55 Pcnt	60 Pcnt
1770129895	54 Pkt	480 Pkt	0.55 Pcnt	60 Pcnt
1770129594	81 Pkt	500 Pkt	0.55 Pcnt	59 Pcnt
1770129294	82 Pkt	500 Pkt	0.55 Pcnt	58 Pcnt
1770128994	64 Pkt	500 Pkt	0.55 Pcnt	58 Pcnt
1770128694	77 Pkt	520 Pkt	0.55 Pcnt	58 Pcnt
1770128393	72 Pkt	510 Pkt	0.55 Pcnt	58 Pcnt
1770128093	62 Pkt	500 Pkt	0.55 Pcnt	58 Pcnt
1770127793	73 Pkt	510 Pkt	0.55 Pcnt	57 Pcnt
1770127492	66 Pkt	500 Pkt	0.55 Pcnt	57 Pcnt
1770127192	73 Pkt	490 Pkt	0.55 Pcnt	58 Pcnt
1770126892	82 Pkt	480 Pkt	0.55 Pcnt	57 Pcnt
1770126592	82 Pkt	470 Pkt	0.55 Pcnt	56 Pcnt
1770126291	70 Pkt	450 Pkt	0.55 Pcnt	55 Pcnt
1770125991	89 Pkt	440 Pkt	0.55 Pcnt	55 Pcnt
1770125691	95 Pkt	440 Pkt	0.55 Pcnt	56 Pcnt
1770125390	78 Pkt	420 Pkt	0.55 Pcnt	57 Pcnt
1770125090	65 Pkt	410 Pkt	0.55 Pcnt	57 Pcnt
1770124790	73 Pkt	410 Pkt	0.55 Pcnt	57 Pcnt
1770124490	66 Pkt	410 Pkt	0.55 Pcnt	57 Pcnt
1770124189	54 Pkt	400 Pkt	0.55 Pcnt	57 Pcnt
1770123889	51 Pkt	410 Pkt	0.55 Pcnt	56 Pcnt
1770123589	53 Pkt	420 Pkt	0.55 Pcnt	56 Pcnt
1770123288	62 Pkt	420 Pkt	0.55 Pcnt	57 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)