APRS Track Direct

My position About ☰

reset

VE3STP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3STP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	LOADVOLTAGE*	LOADCURRENT*	LOADPOWER*	GENPWRYR*	CONPWRYR*
1836274770	12.7 V	0.58 A	7.49 W	5.03 KWH	4.16 KWH
1782517821	13.12 V	0.62 A	8.26 W	21.81 KWH	14.61 KWH
1782515975	13.41 V	0.61 A	8.05 W	21.81 KWH	14.61 KWH
1782514130	13.63 V	0.6 A	8.31 W	21.81 KWH	14.61 KWH
1782512287	13.76 V	0.58 A	8.25 W	21.8 KWH	14.6 KWH
1782510442	13.76 V	0.6 A	8.25 W	21.8 KWH	14.6 KWH
1782508599	13.75 V	0.63 A	8.38 W	21.79 KWH	14.6 KWH
1782506753	13.78 V	0.6 A	8.26 W	21.79 KWH	14.59 KWH
1782504910	13.82 V	0.61 A	8.29 W	21.78 KWH	14.59 KWH
1782503064	13.77 V	0.6 A	8.1 W	21.77 KWH	14.59 KWH
1782501221	13.8 V	0.6 A	8.28 W	21.77 KWH	14.58 KWH
1782499376	13.81 V	0.61 A	8.14 W	21.76 KWH	14.58 KWH
1782497532	13.81 V	0.61 A	8.01 W	21.76 KWH	14.58 KWH
1782495687	13.72 V	0.6 A	8.37 W	21.75 KWH	14.58 KWH
1782493843	13.89 V	0.58 A	8.33 W	21.74 KWH	14.57 KWH
1782491999	13.79 V	0.6 A	8.27 W	21.74 KWH	14.57 KWH
1782490154	13.79 V	0.6 A	8.41 W	21.73 KWH	14.57 KWH
1782488311	13.74 V	0.6 A	8.38 W	21.73 KWH	14.56 KWH
1782486466	13.77 V	0.6 A	8.25 W	21.72 KWH	14.56 KWH
1782484622	14.29 V	0.58 A	8.57 W	21.71 KWH	14.56 KWH
1782482777	14.22 V	0.61 A	8.53 W	21.7 KWH	14.56 KWH
1782480934	14.28 V	0.6 A	8.71 W	21.68 KWH	14.55 KWH
1782479088	14.28 V	0.6 A	8.42 W	21.67 KWH	14.55 KWH
1782477245	13.17 V	0.58 A	7.77 W	21.67 KWH	14.55 KWH
1782475400	13.62 V	0.6 A	8.17 W	21.66 KWH	14.54 KWH

*Used Equation Coefficients:

LOADVOLTAGE: 0, 0.01, 0

LOADCURRENT: 0, 0.01, 0

LOADPOWER: 0, 0.01, 0

GENPWRYR: 0, 0.01, 0

CONPWRYR: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)