This is the latest recevied telemetry packets stored in our database for station/object TK5EP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Temp* | Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786727269 | 4.12 Volt | 28 degC | 71 % | 20 | 5 |
| 1786724163 | 4.14 Volt | 27 degC | 71.5 % | 8.5 | 22 |
| 1786720459 | 4.05 Volt | 28.5 degC | 68.5 % | 0 | 0 |
| 1786701466 | 3.6 Volt | 33 degC | 61.5 % | 0 | 0 |
| 1786700193 | 3.61 Volt | 33 degC | 62 % | 0 | 0 |
| 1786699556 | 3.61 Volt | 33 degC | 62 % | 0 | 0 |
| 1786695090 | 3.64 Volt | 35 degC | 63 % | 0 | 0 |
| 1786693814 | 3.63 Volt | 34.5 degC | 64 % | 0 | 0 |
| 1786692538 | 3.61 Volt | 34 degC | 65 % | 0 | 0 |
| 1786691901 | 3.61 Volt | 33 degC | 65.5 % | 0 | 0 |
| 1786691264 | 3.61 Volt | 32.5 degC | 66.5 % | 0 | 0 |
| 1786689992 | 3.61 Volt | 30.5 degC | 67 % | 0 | 0 |
| 1786689356 | 3.6 Volt | 29.5 degC | 67 % | 0 | 0 |
| 1786688720 | 3.6 Volt | 28 degC | 68 % | 0 | 0 |
| 1786686817 | 3.6 Volt | 24 degC | 69 % | 0 | 0 |
| 1786686183 | 3.6 Volt | 22 degC | 69.5 % | 0 | 0 |
| 1786684916 | 3.6 Volt | 21 degC | 70 % | 0 | 0 |
| 1786684284 | 3.61 Volt | 21 degC | 70 % | 0 | 0 |
| 1786683651 | 3.61 Volt | 21 degC | 70 % | 0 | 0 |
| 1786682386 | 3.61 Volt | 20.5 degC | 70 % | 0 | 0 |
| 1786681753 | 3.61 Volt | 21 degC | 70 % | 0 | 0 |
| 1786679855 | 3.61 Volt | 21 degC | 69.5 % | 0 | 0 |
| 1786679223 | 3.63 Volt | 20.5 degC | 69.5 % | 0 | 0 |
| 1786678591 | 3.63 Volt | 20.5 degC | 69.5 % | 0 | 0 |
| 1786677325 | 3.63 Volt | 21 degC | 69.5 % | 0 | 0 |
*Used Equation Coefficients:
Vbat: 0, 0.008, 2.5
Temp: 0, 0.5, -40
Hum: 0, 0.5, 0
Value4: 0, 0.25, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)