This is the latest recevied telemetry packets stored in our database for station/object DB2OM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1836274069 | 1002.4 hPa | 20.7 C deg | 48.5 % | 1017 hPa | 0 C deg |
| 1762258089 | 1006.1 hPa | 18.9 C deg | 51.7 % | 1020.9 hPa | 0 C deg |
| 1762256274 | 1006.3 hPa | 18.4 C deg | 51.7 % | 1021.1 hPa | 0 C deg |
| 1762254459 | 1006.7 hPa | 17.6 C deg | 52 % | 1021.5 hPa | 0 C deg |
| 1762252644 | 1007 hPa | 17.3 C deg | 52 % | 1021.8 hPa | 0 C deg |
| 1762250825 | 1007.1 hPa | 17 C deg | 52.1 % | 1022 hPa | 0 C deg |
| 1762249010 | 1006.7 hPa | 16.9 C deg | 52 % | 1021.6 hPa | 0 C deg |
| 1762247195 | 1007.2 hPa | 16.5 C deg | 52.1 % | 1022.1 hPa | 0 C deg |
| 1762209064 | 1005.2 hPa | 15.2 C deg | 52.6 % | 1020.1 hPa | 0 C deg |
| 1762207249 | 1005.2 hPa | 15.3 C deg | 52.7 % | 1020.1 hPa | 0 C deg |
| 1762205431 | 1005.2 hPa | 15.7 C deg | 52.2 % | 1020.1 hPa | 0 C deg |
| 1762203616 | 1005.2 hPa | 15.4 C deg | 52.8 % | 1020.2 hPa | 0 C deg |
| 1762201801 | 1005.1 hPa | 15.4 C deg | 52.9 % | 1020.1 hPa | 0 C deg |
| 1762199986 | 1004.8 hPa | 15.5 C deg | 52.9 % | 1019.7 hPa | 0 C deg |
| 1762198167 | 1004.5 hPa | 15.9 C deg | 52.7 % | 1019.5 hPa | 0 C deg |
| 1762196352 | 1004.2 hPa | 15.9 C deg | 52.8 % | 1019.1 hPa | 0 C deg |
| 1762194537 | 1004.2 hPa | 16.5 C deg | 52.6 % | 1019 hPa | 0 C deg |
| 1762192721 | 1004.3 hPa | 16.9 C deg | 52.9 % | 1019.2 hPa | 0 C deg |
| 1762190903 | 1004.3 hPa | 17.2 C deg | 52.9 % | 1019.2 hPa | 0 C deg |
| 1762189087 | 1003.8 hPa | 17.8 C deg | 52.8 % | 1018.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)