APRS Track Direct

My position About ☰

reset

KG7OMB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KG7OMB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Internal_Temp*	Pressure*	Humidity*	Voltage*
1836274154	87.2 F	876.3 mPA	22.6 PCT	13.89 V
1836274003	87.2 F	876.3 mPA	22.7 PCT	13.89 V
1766225760	53 F	858.3 mPA	22.5 PCT	12.46 V
1766224860	53.1 F	858.4 mPA	22.6 PCT	12.47 V
1766223959	53.1 F	857.7 mPA	22.5 PCT	12.48 V
1766223059	53.2 F	857.9 mPA	22.6 PCT	12.48 V
1766222159	53.2 F	857.9 mPA	22.6 PCT	12.48 V
1766221258	53.4 F	858 mPA	22.7 PCT	12.48 V
1766220359	53.4 F	857.7 mPA	22.7 PCT	12.48 V
1766219459	53.5 F	857.6 mPA	22.8 PCT	12.48 V
1766218559	53.5 F	857.9 mPA	22.8 PCT	12.49 V
1766217659	53.6 F	857.1 mPA	22.9 PCT	12.49 V
1766216758	53.7 F	857.6 mPA	22.9 PCT	12.49 V
1766215859	53.8 F	857.5 mPA	22.9 PCT	12.5 V
1766214959	53.9 F	857.3 mPA	23 PCT	12.49 V
1766214058	54.1 F	857 mPA	22.9 PCT	12.5 V
1766213159	54.1 F	856.9 mPA	23 PCT	12.5 V
1766212259	54.2 F	857.1 mPA	23 PCT	12.5 V
1766211358	54.4 F	857.3 mPA	23.1 PCT	12.51 V
1766210458	54.4 F	857 mPA	23 PCT	12.51 V
1766209557	54.6 F	857.1 mPA	23.1 PCT	12.48 V
1766208657	54.7 F	857.2 mPA	23.2 PCT	12.51 V
1766207757	54.7 F	857 mPA	23.2 PCT	12.52 V
1766206856	54.8 F	856.7 mPA	23.3 PCT	12.52 V
1766205957	54.9 F	856.9 mPA	23.3 PCT	12.52 V

*Used Equation Coefficients:

Internal_Temp: 0, 1, 0

Pressure: 0, 1, 0

Humidity: 0, 1, 0

Voltage: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)