This is the latest recevied telemetry packets stored in our database for station/object KD7DRS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274828 | 426 | 0 | 0 | 0 | 0 |
| 1836273928 | 419 | 0 | 0 | 0 | 0 |
| 1762267294 | 426 | 0 | 0 | 0 | 0 |
| 1762266394 | 427 | 0 | 0 | 0 | 0 |
| 1762265494 | 424 | 0 | 0 | 0 | 0 |
| 1762264594 | 427 | 0 | 0 | 0 | 0 |
| 1762263693 | 423 | 0 | 0 | 0 | 0 |
| 1762262793 | 417 | 0 | 0 | 0 | 0 |
| 1762261893 | 419 | 0 | 0 | 0 | 0 |
| 1762260993 | 426 | 0 | 0 | 0 | 0 |
| 1762260093 | 423 | 0 | 0 | 0 | 0 |
| 1762259193 | 425 | 0 | 0 | 0 | 0 |
| 1762258293 | 419 | 0 | 0 | 0 | 0 |
| 1762257393 | 425 | 0 | 0 | 0 | 0 |
| 1762256492 | 417 | 0 | 0 | 0 | 0 |
| 1762255592 | 419 | 0 | 0 | 0 | 0 |
| 1762254692 | 417 | 0 | 0 | 0 | 0 |
| 1762253792 | 418 | 0 | 0 | 0 | 0 |
| 1762252892 | 425 | 0 | 0 | 0 | 0 |
| 1762251992 | 422 | 0 | 0 | 0 | 0 |
| 1762251092 | 417 | 0 | 0 | 0 | 0 |
| 1762250191 | 417 | 0 | 0 | 0 | 0 |
| 1762249291 | 422 | 0 | 0 | 0 | 0 |
| 1762248391 | 421 | 0 | 0 | 0 | 0 |
| 1762247491 | 421 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)