APRS Track Direct

My position About ☰

reset

ED1ZAR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZAR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Fuente*	Fuente*	Batt*	Batt*	T.EXT*
1750189749	13.9 Volt	1.95 Amp	-0.2 Amp	13.1 Volt	-64 C
1750189450	13.9 Volt	2.34 Amp	-0.2 Amp	13.1 Volt	-64 C
1750189449	13.9 Volt	2.34 Amp	-0.2 Amp	13.1 Volt	-64 C
1750189149	13.9 Volt	1.95 Amp	-0.2 Amp	13.1 Volt	-64 C
1750188849	13.9 Volt	2.54 Amp	-0.2 Amp	13.1 Volt	-64 C
1750188549	13.9 Volt	2.15 Amp	-0.2 Amp	13.1 Volt	-64 C
1750188249	13.9 Volt	1.76 Amp	-0.2 Amp	13.1 Volt	-64 C
1750187949	13.9 Volt	2.15 Amp	-0.2 Amp	13.1 Volt	-64 C
1750187650	13.9 Volt	2.54 Amp	-0.2 Amp	13.1 Volt	-64 C
1750187649	13.9 Volt	2.54 Amp	-0.2 Amp	13.1 Volt	-64 C
1750187349	13.9 Volt	1.95 Amp	-0.2 Amp	13.1 Volt	-64 C
1750187049	13.9 Volt	2.54 Amp	-0.2 Amp	13.1 Volt	-64 C
1750186749	13.9 Volt	1.76 Amp	-0.2 Amp	13.1 Volt	-64 C
1750186449	13.9 Volt	1.95 Amp	-0.2 Amp	13.1 Volt	-64 C
1750186149	13.9 Volt	1.76 Amp	-0.2 Amp	13.1 Volt	-64 C
1750185850	13.9 Volt	2.34 Amp	-0.2 Amp	13.1 Volt	-64 C
1750185849	13.9 Volt	2.34 Amp	-0.2 Amp	13.1 Volt	-64 C
1750185549	13.9 Volt	1.76 Amp	-0.2 Amp	13.1 Volt	-64 C
1750185249	13.9 Volt	2.34 Amp	-0.2 Amp	13.1 Volt	-64 C
1750184949	13.9 Volt	1.76 Amp	-0.2 Amp	13.1 Volt	-64 C
1750184649	13.9 Volt	1.76 Amp	-0.2 Amp	13.1 Volt	-64 C
1750184349	13.9 Volt	2.34 Amp	-0.2 Amp	13.1 Volt	-64 C
1750184050	13.9 Volt	2.73 Amp	-0.2 Amp	13.1 Volt	-64 C
1750184049	13.9 Volt	2.73 Amp	-0.2 Amp	13.1 Volt	-64 C
1750183749	13.9 Volt	1.95 Amp	-0.2 Amp	13.1 Volt	-64 C

*Used Equation Coefficients:

Fuente: 0, 0.1, 0

Fuente: 0, 0.1953, -24.8031

Batt: 0, 0.1953, -24.8031

Batt: 0, 0.1, 0

T.EXT: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)