APRS Track Direct

My position About ☰

reset

TA3D Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3D. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1758178285	16 Pkt	23 Pkt	19 Pkt	-64 dBm	13.35 V
1758177337	6 Pkt	24 Pkt	31 Pkt	-64 dBm	13.35 V
1758176390	11 Pkt	21 Pkt	24 Pkt	-66 dBm	13.37 V
1758175444	10 Pkt	23 Pkt	38 Pkt	-66 dBm	13.35 V
1758174500	8 Pkt	19 Pkt	30 Pkt	-65 dBm	13.35 V
1758173557	7 Pkt	17 Pkt	31 Pkt	-66 dBm	13.35 V
1758172615	10 Pkt	19 Pkt	26 Pkt	-64 dBm	13.35 V
1758171673	7 Pkt	17 Pkt	26 Pkt	-63 dBm	13.35 V
1758170732	8 Pkt	27 Pkt	30 Pkt	-63 dBm	13.35 V
1758169782	9 Pkt	23 Pkt	12 Pkt	-67 dBm	13.35 V
1758168834	7 Pkt	26 Pkt	18 Pkt	-65 dBm	13.35 V
1758167886	9 Pkt	22 Pkt	26 Pkt	-67 dBm	13.35 V
1758166939	9 Pkt	18 Pkt	17 Pkt	-65 dBm	13.35 V
1758165995	9 Pkt	19 Pkt	13 Pkt	-65 dBm	13.35 V
1758165055	7 Pkt	21 Pkt	18 Pkt	-64 dBm	13.35 V
1758164110	9 Pkt	19 Pkt	17 Pkt	-66 dBm	13.35 V
1758163169	7 Pkt	20 Pkt	14 Pkt	-64 dBm	13.35 V
1758162225	6 Pkt	19 Pkt	14 Pkt	-64 dBm	13.35 V
1758161281	5 Pkt	20 Pkt	16 Pkt	-65 dBm	13.35 V
1758160338	9 Pkt	13 Pkt	17 Pkt	-64 dBm	13.35 V
1758159401	7 Pkt	15 Pkt	19 Pkt	-65 dBm	13.35 V
1758158462	5 Pkt	13 Pkt	18 Pkt	-67 dBm	13.35 V
1758157527	8 Pkt	13 Pkt	18 Pkt	-67 dBm	13.35 V
1758156587	8 Pkt	14 Pkt	23 Pkt	-64 dBm	13.35 V
1758155647	8 Pkt	13 Pkt	19 Pkt	-67 dBm	13.35 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)