APRS Track Direct

My position About ☰

reset

E22ZMG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22ZMG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1778066679	28 ug/m3	36 ug/m3	41 ug/m3	-58 dBm	13.06 V
1778066054	24 ug/m3	33 ug/m3	39 ug/m3	-57 dBm	13.06 V
1778065429	24 ug/m3	32 ug/m3	36 ug/m3	-58 dBm	12.86 V
1778064805	23 ug/m3	30 ug/m3	31 ug/m3	-58 dBm	12.94 V
1778064179	24 ug/m3	32 ug/m3	38 ug/m3	-58 dBm	12.96 V
1778063554	22 ug/m3	29 ug/m3	30 ug/m3	-57 dBm	12.92 V
1778062929	23 ug/m3	31 ug/m3	33 ug/m3	-57 dBm	12.84 V
1778062303	22 ug/m3	29 ug/m3	31 ug/m3	-57 dBm	12.94 V
1778061678	21 ug/m3	29 ug/m3	32 ug/m3	-58 dBm	13.06 V
1778061053	22 ug/m3	28 ug/m3	28 ug/m3	-57 dBm	12.94 V
1778060428	23 ug/m3	30 ug/m3	30 ug/m3	-57 dBm	12.96 V
1778059804	23 ug/m3	30 ug/m3	31 ug/m3	-58 dBm	12.86 V
1778059178	23 ug/m3	31 ug/m3	34 ug/m3	-58 dBm	12.94 V
1778058554	27 ug/m3	36 ug/m3	45 ug/m3	-58 dBm	12.9 V
1778057928	27 ug/m3	36 ug/m3	42 ug/m3	-57 dBm	12.94 V
1778057302	27 ug/m3	39 ug/m3	45 ug/m3	-58 dBm	12.96 V
1778056678	28 ug/m3	38 ug/m3	44 ug/m3	-57 dBm	13.06 V
1778056053	27 ug/m3	37 ug/m3	44 ug/m3	-58 dBm	12.94 V
1778055428	32 ug/m3	43 ug/m3	50 ug/m3	-57 dBm	12.92 V
1778054804	29 ug/m3	39 ug/m3	46 ug/m3	-58 dBm	13.06 V
1778054178	28 ug/m3	38 ug/m3	46 ug/m3	-59 dBm	12.84 V
1778053553	30 ug/m3	42 ug/m3	52 ug/m3	-58 dBm	12.86 V
1778052928	30 ug/m3	42 ug/m3	52 ug/m3	-57 dBm	13.06 V
1778052303	32 ug/m3	43 ug/m3	50 ug/m3	-59 dBm	12.86 V
1778051676	30 ug/m3	41 ug/m3	51 ug/m3	-59 dBm	12.84 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)